How to replace the components and adjust the new Shift Cable after installation on Mazda 3?

Before replacing the components, disconnect the cable from the negative battery terminal. The next step is to remove the upper engine cover - lift it upward, on each side, and remove it from the center mounting posts. After that, the battery and the battery tray and then the center console. Take off the shift lever and remove the shift cables from the shift lever. Pry off the ends of the cables from the shift lever arm ball studs at the transaxle. Some models contain spring clips that can be rotated, making removal easier. Be sure not to damage the clips. Detach the ends of the cable housing located at the transaxle from the support bracket, taking care to avoid damaging the plastic flanges of the cable housing. Detach the fasteners holding the transmission cable plate/grommet on the inside at the floor where the cable passes through, then pull the shift cables through from the inside. Note that the grommet is part of the cable assembly. The process of installation is the opposite of removal. Furthermore, adjust the new cable after installation. In order to perform the adjustment, the parking brake should be set. Further, remove the gearshift knob and the center console trim panel. Move the safety lock away from the shifter ball stud and the cable lock away from the end fitting of the shift cable. Ensure that the shift lever is in the center position so that the lever and the transaxle are in Neutral. Push the cable lock onto the cable, slide the safety lock over the primary shift cable lock, and then, reinstall the center console trim panel and gearshift knob.

Is replacing the shift cable in a vehicle a challenging procedure for home mechanics in manual transmission on Mazda 6?

Replacing the cables is a difficult job for home mechanics as it involves removing the instrument panel and the HVAC module. Have the air conditioning system first discharged by a technician. To allow the engine to cool down if the car has recently been driven and then give the auto repair both battery cables with at least two minutes. Next, remove battery and battery tray; center console and heater core/evaporator core housing, and so on. For models from 2008 and prior, remove the clips that attach the shift linkage cables to the shift lever arms at the transaxle. Do not damage the spring clips. The clips can be rotated for easier removal. For model years 2009 and later, pry the shift cable and selector cable from the ball studs on the shift lever arms using a small screwdriver. Detach the cable tube end fittings from the support bracket at the transaxle carefully without damaging them. Unplug the airbag module from the attachment on the floor and remove insulation pad. Release the clips holding the airbag module harness. Take off the fasteners that hold the transmission cable plate/geometer in position and pull the shift cables through the floor. Installation, the reverse of removal, is ensured by adjusting the new cable afterwards. Refill and air the cooling system, then have the shop that discharged it evacuate, charge, and leak test it. For adjustment, apply the parking brake, removing the gearshift knob and the centre console trim panel, move the safety lock away from the shifter ball stud and the cable lock away from the selector cable end fitting. Position the shift lever in the centre position, and ensure the lever and transaxle is in Neutral. Push the cable lock on to the cable and slide the safety lock over the primary shift cable lock. Reinstall the centre console trim panel and the gearshift knob.

Genuine Mazda Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

69 Shift Cables found

View related parts
Mazda Control Cable Part Number: KC9E-46-500A
$81.25 MSRP: $108.36
You Save: $27.11 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Shift Control Cable
- Replaces: KC9E-46-500
Fits the following Mazda Models:
- CX-5 | 2018-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Assembly Part Number: BN8E-46-500B
$198.16 MSRP: $264.28
You Save: $66.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Cable; Shift Control Cable
- Replaces: B32T-46-500, B32T-46-500A, BN8E-46-500, BN8E-46-500A
Fits the following Mazda Models:
- 3 | 2004-2009 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Cable Part Number: KD31-46-500
$85.01 MSRP: $113.38
You Save: $28.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable & Guide Part Number: C291-46-500A
$66.50 MSRP: $88.68
You Save: $22.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 5 | 2012-2015, 2008-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: D09T-46-500A
$101.79 MSRP: $135.75
You Save: $33.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Cable Part Number: VA45-46-500
$34.36 MSRP: $45.83
You Save: $11.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: VA60-46-500A
$35.95 MSRP: $47.94
You Save: $11.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: BDTV-46-500D
$47.33 MSRP: $63.12
You Save: $15.79 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 3 | 2024-2025 | 2.5 S, Carbon Edition, Preferred, Premium, Select Sport | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2025 | 2.5 S, 2.5 S Carbon Edition | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: DEKK-46-500
$64.59 MSRP: $86.14
You Save: $21.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 3 | 2022-2025 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2025 | 2.5 Carbon Turbo, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: BDTV-46-500C
$76.26 MSRP: $101.71
You Save: $25.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
- Replaces: BCKA-46-500B, BDTV-46-500B, BCKA-46-500C
Fits the following Mazda Models:
- 3 | 2019-2023 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2022 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Control Cable Part Number: EF92-46-500B
$92.93 MSRP: $123.93
You Save: $31.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
- Replaces: EF92-46-500A, EF92-46-500
Fits the following Mazda Models:
- Tribute | 2005-2006 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Cable Part Number: BFWM-46-500
$110.66 MSRP: $147.59
You Save: $36.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Cable Bracket, Shift Control Cable
Fits the following Mazda Models:
- 3 | 2021-2025 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: K127-46-500
$121.49 MSRP: $162.02
You Save: $40.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- CX-5 | 2017-2019 | Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable, Control Part Number: GHK3-46-500A
$121.73 MSRP: $162.33
You Save: $40.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE,CONTROL; Cable, Control Cable, Shift Control Cable
- Replaces: GHK3-46-500
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: GBVJ-46-500
$124.58 MSRP: $166.13
You Save: $41.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: BCKA-46-500D
$126.98 MSRP: $169.34
You Save: $42.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 3 | 2023-2025 | 2.5 S, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda Control Cable Part Number: BJS9-46-500
$152.13 MSRP: $202.88
You Save: $50.75 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Assembly Part Number: BR9L-46-500B
$171.56 MSRP: $228.80
You Save: $57.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
- Replaces: BR9L-46-500, BR9L-46-500A
Fits the following Mazda Models:
- 3 | 2006-2009 | Mazdaspeed, S | 4 Cyl 2.3 L GAS
View related parts
Mazda Cable Part Number: GHK1-46-500
$180.63 MSRP: $240.89
You Save: $60.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Control Cable, Shift Control Cable
- Replaces: BJS7-46-500A
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2020 | Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Assembly Part Number: D652-46-500F
$216.95 MSRP: $289.32
You Save: $72.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Control; Shift Control Cable
- Replaces: D652-46-500E, D652-46-500C
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS

| Page 1 of 4 |Next >

1-20 of 69 Results

Mazda Shift Cable

The Mazda Shift Cable converts the simple movement of the hand at the gear selector into corresponding precise motion at the transmission and provides the driver with crisp control each time the gear is chosen. Mazda gets loyalty because it combines sharp handling with engines like SKYACTIV that get more power from every drop of fuel. KODO design language adds sculpted lines that look fast, even when parked. Mazda i-ACTIVSENSE technology is packed in the cabins, which actively watch the road, warn the driver, and even assist in braking, while available i-ACTIV all-wheel drive helps maintain traction on wet or rough pavement. The automaker also investigates electrification via mild hybrids and battery models, which reflects the fact that Mazda strives for cleaner energy without taking away the joy that makes every drive lively. Mazda stands out for delivering automobiles and SUVs that are efficient, safe, and stylish. Drivers appreciate the brand's ability to keep them attainable and dependable through years of ownership. The Shift Cable is universal in this range, as all vehicles that use a mechanical shifter need the same strong link between lever and gearbox. The cable, which is routed through tight spaces, is flexible and, consequently, any fore and aft or side movement is transformed into a push or pull at the transmission to firmly lock in the selected gear. Make sure the length and tension are proper to prevent slop, while strong bushings reduce play and keep positive shift. A new Shift Cable will quickly restore the precision feel that fits in with Mazda's design dynamics.

You'll get great performance and real durability when you pick genuine OEM Shift Cable. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Shift Cable Parts and Q&A

Cable Assembly
BAK6-46-500A
Q:
How to replace the components and adjust the new Shift Cable after installation on Mazda 3?
A:
Before replacing the components, disconnect the cable from the negative battery terminal. The next step is to remove the upper engine cover - lift it upward, on each side, and remove it from the center mounting posts. After that, the battery and the battery tray and then the center console. Take off the shift lever and remove the shift cables from the shift lever. Pry off the ends of the cables from the shift lever arm ball studs at the transaxle. Some models contain spring clips that can be rotated, making removal easier. Be sure not to damage the clips. Detach the ends of the cable housing located at the transaxle from the support bracket, taking care to avoid damaging the plastic flanges of the cable housing. Detach the fasteners holding the transmission cable plate/grommet on the inside at the floor where the cable passes through, then pull the shift cables through from the inside. Note that the grommet is part of the cable assembly. The process of installation is the opposite of removal. Furthermore, adjust the new cable after installation. In order to perform the adjustment, the parking brake should be set. Further, remove the gearshift knob and the center console trim panel. Move the safety lock away from the shifter ball stud and the cable lock away from the end fitting of the shift cable. Ensure that the shift lever is in the center position so that the lever and the transaxle are in Neutral. Push the cable lock onto the cable, slide the safety lock over the primary shift cable lock, and then, reinstall the center console trim panel and gearshift knob.
Shift Control Cable
GK2C-46-500L
Q:
Is replacing the shift cable in a vehicle a challenging procedure for home mechanics in manual transmission on Mazda 6?
A:
Replacing the cables is a difficult job for home mechanics as it involves removing the instrument panel and the HVAC module. Have the air conditioning system first discharged by a technician. To allow the engine to cool down if the car has recently been driven and then give the auto repair both battery cables with at least two minutes. Next, remove battery and battery tray; center console and heater core/evaporator core housing, and so on. For models from 2008 and prior, remove the clips that attach the shift linkage cables to the shift lever arms at the transaxle. Do not damage the spring clips. The clips can be rotated for easier removal. For model years 2009 and later, pry the shift cable and selector cable from the ball studs on the shift lever arms using a small screwdriver. Detach the cable tube end fittings from the support bracket at the transaxle carefully without damaging them. Unplug the airbag module from the attachment on the floor and remove insulation pad. Release the clips holding the airbag module harness. Take off the fasteners that hold the transmission cable plate/geometer in position and pull the shift cables through the floor. Installation, the reverse of removal, is ensured by adjusting the new cable afterwards. Refill and air the cooling system, then have the shop that discharged it evacuate, charge, and leak test it. For adjustment, apply the parking brake, removing the gearshift knob and the centre console trim panel, move the safety lock away from the shifter ball stud and the cable lock away from the selector cable end fitting. Position the shift lever in the centre position, and ensure the lever and transaxle is in Neutral. Push the cable lock on to the cable and slide the safety lock over the primary shift cable lock. Reinstall the centre console trim panel and the gearshift knob.