How to remove the front and rear bumper cover on Mazda 3?

Unplug the cable on the negative battery terminal. Relax the front wheel lug nut, lift the car and hold it firmly on jackstands then detach the front wheels. Take out the splash shield mounting fasteners and remove the splash shield(s). In the case of the front bumper cover, you have to first detach the upper mounting fasteners of the radiator support, followed by the bottom splash shield and radiator support splash shield. Then unfasten the fender splash shields and inner fender to the bumper cover, unplug the electrical connectors in the fog lamps (where present) and the inner fenderwell back to release the bumper cover-to-fender mounting fastener. The fender has three mounting fasteners on its edge on 2010 and subsequent models. First of all, unplug the bumper cover mounting tabs in the upper rear edges to the lower edge slots in the front fenders, by pulling the bumper cover outwards, beginning at the fender side and pulling towards the center. Check with a final look with a flashlight to see that the bumper cover is thoroughly uncovered, all the electrical connectors are uncomingled and all the wiring harnesses are clear of the area. Installation is the opposite of removal with the help of removing the front bumper cover. In the case of the rear bumper cover, firstly, take out the taillight housing assemblies, lift the rear part of the vehicle and put it on jackstands. Take off the mounting fasteners of the rear of the wheel wells, then in the taillight area, take off the pin-type fastener and bolt on each upper corner of the rear bumper cover then the mounting fasteners of the underside of the rear bumper cover. Once more, do a final check with a flashlight to make sure that the bumper cover is fully removed, all of the electrical connections are loose and that all of the wiring harnesses were safely clear. Installation can be done in the same direction as removal with some help, except that, when replacing the bumper cover, you must have help attaching the cover to the vehicle against falling.

How to remove the front and rear bumper cover on Mazda 6?

Removing the front bumper cover begins by disconnecting the cable off the negative battery terminal. Unscrew the lug nuts in the front wheel, and lift the vehicle and place it on jackstands to be there securely, and then take off the front wheels. Then remove the splash shield mounting fasteners and take off splash shields. Detach the upper mounting clamps of the bumper cover of the radiator support with the exception of 2009 and subsequent models, the rubber hood stops should be removed. To remove bumper cover-to-fender mounting fastener, pull back the inner fenderwell, and then access the mount mount. Unplug the electrical connector of the marker lights and fog lights, when fitted. Partial Disassemble the bumper cover mounting tabs along upper rear edges out of the lower side of lower edge of front fenders by pulling bumper cover outwards, beginning on fender side then to the middle. Do a final inspection using flashlight to make sure that the bumper cover is fully removed, that all the electrical connectors are disconnected, and that all wiring harnesses are well out of the way. It will be necessary that with help the front bumper cover be removed and then it is the same procedure to install as it was to remove. To remove the rear bumper cover, you will first have to take off the taillight housing assemblies and the bumper cover mounting fasteners. Relax the wheel nuts of the rear and lift the vehicle on jackstands and ensure it is properly supported then remove the rear wheels. Take the mounting fasteners off the underside of the rear bumper cover, and the rear of the wheel wells. Check again with a flashlight to ensure that the bumper cover is fully removed, all electrical connectors are un-plugged and all wiring Harnesses are clear of the workspace. With the help, take off the bumper cover at the rear, but in the case of 2009 and later models, the bumper cover finishes at the fenderwell are pulled outwards to release the mounting clips in the bracket. The opposite of removal is the installation, and it is better to be assisted in placing the bumper cover in the right place.

Genuine Mazda Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

229 Bumper Covers found

View related parts
Mazda Bumper Cover Part Number: NDYN-50-22X-BB
$400.35 MSRP: $538.20
You Save: $137.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
Fits the following Mazda Models:
- MX-5 Miata | 2019 | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Bumper Cover Part Number: KBYB-50-22XB-BB
$283.89 MSRP: $378.59
You Save: $94.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: KNYL-50-22X-BB, KBYB-50-22X-BB
Fits the following Mazda Models:
- CX-5 | 2019-2021 | Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: BJS7-50-031A-9U
$378.16 MSRP: $508.39
You Save: $130.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BJS7-50-031A-BB, BHN1-50-031A-BB, BHN1-50-031B-BB, BJS7-50-031-BB
Fits the following Mazda Models:
- 3 | 2014-2016 | I Sport, I Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: DGY9-50-220
$420.26 MSRP: $564.99
You Save: $144.73 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: DGH9-50-221-BB
Fits the following Mazda Models:
- CX-30 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper, Front Part Number: GMY3-50-031
$454.61 MSRP: $611.16
You Save: $156.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BUMPER,FRONT; Bumper Cover
- Position: Front
- Replaces: GMN3-50-031C-BB, GMN3-50-031B-BB
Fits the following Mazda Models:
- 6 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: KLYF-50-22X-9U
$273.94 MSRP: $365.32
You Save: $91.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Bumper W/O Parking S
- Replaces: KBYA-50-22XB-BB, KBYA-50-22X-BB, KLYF-50-22X-BB
Fits the following Mazda Models:
- CX-5 | 2017-2021 | Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: KSD4-50-221B-9U
$301.99 MSRP: $402.73
You Save: $100.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: KSD4-50-221B, KSD4-50-221B-BB, KSC2-50-221A-BB
Fits the following Mazda Models:
- CX-5 | 2022-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature | 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: NFYR-50-22X-BB
$498.52 MSRP: $670.19
You Save: $171.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
Fits the following Mazda Models:
- MX-5 Miata | 2020-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Bumper Cover Part Number: N0Y1-50-030A-BB
$445.98 MSRP: $599.55
You Save: $153.57 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: N0Y1-50-030A, NE46-50-031A, N0Y1-50-031A, N0Y1-50-031
Fits the following Mazda Models:
- Miata | 2001-2005 | Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Bumper, Front Part Number: N2Y1-50-03XA-BB
$615.46 MSRP: $827.41
You Save: $211.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BUMPER,FRONT; Bumper Cover
- Position: Front
- Replaces: N2Y1-50-03X-BB, NAY4-50-03X-BB, N2Y1-50-03XA-8P
Fits the following Mazda Models:
- MX-5 Miata | 2016-2025 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda BUMPER, FRONT (W/O PRIMER) Part Number: KD45-50-031-9U
$311.83 MSRP: $415.84
You Save: $104.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Position: Front
- Replaces: KD45-50-031-BB, KD45-50-031
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: KSD5-50-031A-BB
$333.65 MSRP: $444.95
You Save: $111.30 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: KSC3-50-031-BB, KSD5-50-031-BB
Fits the following Mazda Models:
- CX-5 | 2022-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature | 4 Cyl 2.5 L GAS
View related parts
Mazda Lower Cover Part Number: BCW8-50-101A
$15.98 MSRP: $21.30
You Save: $5.32 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover(Right), Front Bumper
- Position: Passenger Side
- Replaces: BCW8-50-101
Fits the following Mazda Models:
- 3 | 2010 | i | 4 Cyl 2.0 L GAS
View related parts
Mazda Bumper Cover Part Number: KL2F-50-031-BB
$311.83 MSRP: $415.84
You Save: $104.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaced by: KL2F-50-031-9U
Fits the following Mazda Models:
- CX-5 | 2017-2021 | Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: VA40-50-031B-BB
$307.49 MSRP: $410.06
You Save: $102.57 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: VA40-50-031-BB, VA40-50-031A-BB
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Lower Cover Part Number: KSD7-50-222-BB
$319.06 MSRP: $425.51
You Save: $106.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear Lower
- Position: Lower
Fits the following Mazda Models:
- CX-5 | 2022-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature | 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: TK22-50-221B-BB
$542.20 MSRP: $728.91
You Save: $186.71 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: TK22-50-221-BB
Fits the following Mazda Models:
- CX-9 | 2013-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.7 L GAS
View related parts
Mazda Bumper Cover Part Number: BJT6-50-221A-9U
$286.16 MSRP: $381.63
You Save: $95.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: BFYH-50-221, BHN9-50-221B-BB, BJT6-50-221-BB, BJT6-50-221A-BB, BHN9-50-221A-BB
Fits the following Mazda Models:
- 3 | 2014-2016 | I Sport, I Touring, i Grand Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: DGY9-50-030
$326.03 MSRP: $434.79
You Save: $108.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: DGH9-50-031A-BB, DGH9-50-031-BB
Fits the following Mazda Models:
- CX-30 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Bumper Cover Part Number: BDTS-50-031E-BB
$424.32 MSRP: $570.44
You Save: $146.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BCKA-50-031E-BB, BCKB-50-031E-BB, BDTS-50-031D-BB, BCKB-50-031-BB, BCKA-50-031A-BB, BCKB-50-031D-BB, BCKA-50-031-BB, BDTS-50-031-BB
Fits the following Mazda Models:
- 3 | 2019-2025 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 12 |Next >

1-20 of 229 Results

Mazda Bumper Cover

The Mazda Bumper Cover is smooth and protects the solid-impact bar by concealing its appearance on every vehicle in the lineup. This ensures styling remains sharp while absorbing scuffs from little knocks. Apart from this intelligent shield, Mazda has a reputation for creating vehicles that feel alive on wheels. It incorporates its KODO design and employs engines, including SKYACTIV, that deliver more mileage per gallon while also feeling sprightly off the mark. Mazda was founded in 1931, achieved fame with the use of the rotary engine in the 1960s, and now continues to branch out into mild hybrids and electric drive. It also boasts a slew of i-ACTIVSENSE features that watch the lanes and manage speed for safety. Plus, i-ACTIV all-wheel drive is available for all models. It offers confidence on gravel and in snow. Mazda designers have concentrated on drawing attention to the car with a low profile and negative stance, making it seem like the car is moving. Simultaneously, the driver-centric cabin still gives all essential controls within easy reach, displaying Mazda's wonderful balancing act between art and function. The Bumper Cover allows grilles and trims to sleekly span the width of the vehicle. In the same breath, it also channels cooling air to radiators and brakes, keeping performance sharp. Every gap created by the absence of the fog lamp or the tow hook has been neatly filled with inserts to keep the surface continuous. Thus, you see that the Bumper Cover does more than good looks; it guards the underlying parts. It is also a necessary element that ensures every opening is of a factory fit. Choosing the right Mazda part can help with alignment, minimize drag, and keep every drive from the driveway in perfect form.

You'll get great performance and real durability when you pick genuine OEM Bumper Cover. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Bumper Cover Parts and Q&A

Bumper Cover
BAP8-50-031D-BB
Q:
How to remove the front and rear bumper cover on Mazda 3?
A:
Unplug the cable on the negative battery terminal. Relax the front wheel lug nut, lift the car and hold it firmly on jackstands then detach the front wheels. Take out the splash shield mounting fasteners and remove the splash shield(s). In the case of the front bumper cover, you have to first detach the upper mounting fasteners of the radiator support, followed by the bottom splash shield and radiator support splash shield. Then unfasten the fender splash shields and inner fender to the bumper cover, unplug the electrical connectors in the fog lamps (where present) and the inner fenderwell back to release the bumper cover-to-fender mounting fastener. The fender has three mounting fasteners on its edge on 2010 and subsequent models. First of all, unplug the bumper cover mounting tabs in the upper rear edges to the lower edge slots in the front fenders, by pulling the bumper cover outwards, beginning at the fender side and pulling towards the center. Check with a final look with a flashlight to see that the bumper cover is thoroughly uncovered, all the electrical connectors are uncomingled and all the wiring harnesses are clear of the area. Installation is the opposite of removal with the help of removing the front bumper cover. In the case of the rear bumper cover, firstly, take out the taillight housing assemblies, lift the rear part of the vehicle and put it on jackstands. Take off the mounting fasteners of the rear of the wheel wells, then in the taillight area, take off the pin-type fastener and bolt on each upper corner of the rear bumper cover then the mounting fasteners of the underside of the rear bumper cover. Once more, do a final check with a flashlight to make sure that the bumper cover is fully removed, all of the electrical connections are loose and that all of the wiring harnesses were safely clear. Installation can be done in the same direction as removal with some help, except that, when replacing the bumper cover, you must have help attaching the cover to the vehicle against falling.
Bumper Cover
GSYL-50-031C-BB
Q:
How to remove the front and rear bumper cover on Mazda 6?
A:
Removing the front bumper cover begins by disconnecting the cable off the negative battery terminal. Unscrew the lug nuts in the front wheel, and lift the vehicle and place it on jackstands to be there securely, and then take off the front wheels. Then remove the splash shield mounting fasteners and take off splash shields. Detach the upper mounting clamps of the bumper cover of the radiator support with the exception of 2009 and subsequent models, the rubber hood stops should be removed. To remove bumper cover-to-fender mounting fastener, pull back the inner fenderwell, and then access the mount mount. Unplug the electrical connector of the marker lights and fog lights, when fitted. Partial Disassemble the bumper cover mounting tabs along upper rear edges out of the lower side of lower edge of front fenders by pulling bumper cover outwards, beginning on fender side then to the middle. Do a final inspection using flashlight to make sure that the bumper cover is fully removed, that all the electrical connectors are disconnected, and that all wiring harnesses are well out of the way. It will be necessary that with help the front bumper cover be removed and then it is the same procedure to install as it was to remove. To remove the rear bumper cover, you will first have to take off the taillight housing assemblies and the bumper cover mounting fasteners. Relax the wheel nuts of the rear and lift the vehicle on jackstands and ensure it is properly supported then remove the rear wheels. Take the mounting fasteners off the underside of the rear bumper cover, and the rear of the wheel wells. Check again with a flashlight to ensure that the bumper cover is fully removed, all electrical connectors are un-plugged and all wiring Harnesses are clear of the workspace. With the help, take off the bumper cover at the rear, but in the case of 2009 and later models, the bumper cover finishes at the fenderwell are pulled outwards to release the mounting clips in the bracket. The opposite of removal is the installation, and it is better to be assisted in placing the bumper cover in the right place.