How to remove and install the Ignition Control Module for DISTRIBUTOR IGNITION SYSTEM on Mazda B2200?

To remove and install the module, first disconnect the battery cables and take out the battery. Next, disconnect the electrical connector at the module. After that, remove the module retaining bolt and take out the module. Position the rivet on the module into the teardrop-shaped mounting hole on the fender apron, push the module into place, and secure it with the mounting bolt, tightening it to 22-31 inch lbs. (2.5-3.5Nm).

How to check and replace an Ignition Control Module in an engine compartment on Mazda Protege?

A special igniter checker is required to check the function of the igniter, and some automotive parts stores will perform the check. Begin by detaching the cable from the negative terminal of the battery, then disconnect the electrical connector from the igniter. Next, remove the screws from the bracket assembly and take out the igniter and bracket assembly from the engine compartment. Installation is the reverse of removal.

Genuine Mazda Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Ignition Control Modules found

View related parts
Mazda Igniter Part Number: B61P-18-251
$331.79 MSRP: $442.46
You Save: $110.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignitor Set; Igniter
Fits the following Mazda Models:
- Miata | 1990-1994 | Base, LE, M Edition, SE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Igniter Part Number: F829-18-V20
$407.05 MSRP: $547.23
You Save: $140.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignitor
Fits the following Mazda Models:
- 626 | 1988-1989 | DX, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
- B2200 | 1987-1990 | Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS
- MX-6 | 1988-1989 | DX, GT, GT 4WS, LX | 4 Cyl 2.2 L GAS
View More
View related parts
Mazda Igniter Part Number: JF01-18-251
$411.90 MSRP: $553.74
You Save: $141.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignitor Set
Fits the following Mazda Models:
- 929 | 1988-1989 | Base | 6 Cyl 3.0 L GAS
View related parts
Mazda Igniter Part Number: E301-24-910
$83.83 MSRP: $581.72
You Save: $497.89 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignitor
Fits the following Mazda Models:
- RX-7 | 1984-1985 | GS, GSL, GSL-SE, S | 2 Cyl 1.1 L GAS, 2 Cyl 1.3 L GAS
View related parts
Mazda Igniter Part Number: BP01-18-251
$33.93 MSRP: $44.54
You Save: $10.61 (24%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- 323 | 1990-1994 | Base, SE | 4 Cyl 1.6 L GAS
- 929 | 1992-1994 | Base | 6 Cyl 3.0 L GAS
- B2200 | 1990-1993 | Base, LE-5, SE-5 | 4 Cyl 2.2 L GAS
- B2600 | 1987-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.6 L GAS
- MPV | 1992-1994 | Cargo, Passenger | 4 Cyl 2.6 L GAS
- MX-3 | 1992-1993 | Base | 4 Cyl 1.6 L GAS
- Protege | 1990-1994 | 4WD, Base, DX, LX, SE | 4 Cyl 1.8 L GAS
View More
View related parts
Mazda Igniter Part Number: B6S7-18-251
Product Specifications
- Other Name: Ignitor Set
Fits the following Mazda Models:
- 626 | 1990-1992 | DX, GT, LE, LX | 4 Cyl 2.2 L GAS
- 929 | 1990-1991 | Base, S | 6 Cyl 3.0 L GAS
- MPV | 1992-1995 | L, LX, LXE, Passenger | 6 Cyl 3.0 L GAS
- MX-6 | 1990-1992 | DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS
View More
View related parts
Mazda Igniter Part Number: FEFB-18-V20
Product Specifications
- Other Name: Ignitor
Fits the following Mazda Models:
- B2200 | 1991-1993 | Base, LE-5, SE-5 | 4 Cyl 2.2 L GAS
View related parts
Mazda Igniter Part Number: JE15-18-V20
Product Specifications
- Other Name: Ignitor / Not Pick-Up Set
Fits the following Mazda Models:
- MPV | 1989-1991 | Cargo, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Igniter Part Number: N3A1-18-251
Product Specifications
- Other Name: Ignitor, Ignition Coil Trailing
Fits the following Mazda Models:
- RX-7 | 1993-1995 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS

Mazda Ignition Control Module

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Ignition Control Module. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Ignition Control Modules. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Ignition Control Modules. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Ignition Control Module that keeps your car running like new.

Mazda Ignition Control Module Parts and Q&A

Igniter
F829-18-V20
Q: How to remove and install the Ignition Control Module for DISTRIBUTOR IGNITION SYSTEM on Mazda B2200?
A:
To remove and install the module, first disconnect the battery cables and take out the battery. Next, disconnect the electrical connector at the module. After that, remove the module retaining bolt and take out the module. Position the rivet on the module into the teardrop-shaped mounting hole on the fender apron, push the module into place, and secure it with the mounting bolt, tightening it to 22-31 inch lbs. (2.5-3.5Nm).
Igniter
BP01-18-251
Q: How to check and replace an Ignition Control Module in an engine compartment on Mazda Protege?
A:
A special igniter checker is required to check the function of the igniter, and some automotive parts stores will perform the check. Begin by detaching the cable from the negative terminal of the battery, then disconnect the electrical connector from the igniter. Next, remove the screws from the bracket assembly and take out the igniter and bracket assembly from the engine compartment. Installation is the reverse of removal.