How to remove and install a fender on Mazda 3?

Unplug the cable of the negative battery terminal. Unscrew the lug nuts of the front wheel, lift up the vehicle and place it firmly on jackstands and take off the front wheel. You should take off the splash shield, inner fender splash shield, inner fenderwell, fasteners and the front part of the splash shield. It is possible that some of the models may have a front mud guard attached to the inner fenderwell, which must first be removed by removing three of the side mounting fasteners and one below. Take off front bumper cover. Remove headlight and side markers light assemblies. While standing in front of the fender, take out the mounting bolt in the side corner of the fender. Take out the windshield wipers. Unscrew the two bottom fender bolts; on certain models a side step molding may be over the top of these bolts, and this will have to be unscrewed by unscrewing its plastic fasteners and lifted back. Open the front door and take out the upper rear fender bolt out of the doorjamb. Unattach the fender upper bolts and then pick-up the fender, preferably with a helper to avoid damaging the adjacent body parts. The process of installing is the opposite of removing and in this process, one should ensure that there is a match between the fender and the hood and the front side of the door and then screw the bolts.

How to remove and install a fender on Mazda 6?

Firstly, take off the housing of the headlight. The next step is to unscrew the lug nuts of the front wheel, lift the car and place it resting on jackstands and take off the front wheel. Unscrew the fender splash shield fasteners that hold the inside fender splash shield in place. Subsequently, remove electrical connector on the front sidemarker light, as well as the front bracket fasteners. With 2009 model and onwards, the bottom two fender bolts are under a side molding; remove the plastic push-pins and peel away the end of the lower part of the fender modeling to expose the two lower fender bolts. Take your time when prying back the rocker panel so as to break the rocker panel-to-fender fasteners. Pop the front door to get the upper rear fender bolt out of the doorjamb. Next take off the upper fender bolts and inner fender rear bolt and the fender. One would also recommend that an assistant helps during the process of getting the fender off the car otherwise he or she may cause damage to the body panels to the surroundings. Last but not least is the installation, again, it is the opposite of removal; one should inspect the fit of the fender to the hood and front of the door to ensure that the bolts are tightened.

Genuine Mazda Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

125 Fenders found

View related parts
Mazda Fender Part Number: BDTS-52-110
$160.03 MSRP: $213.41
You Save: $53.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front; Fender
- Position: Right
- Replaces: BCJH-52-110
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: BDTS-52-210
$160.79 MSRP: $214.43
You Save: $53.64 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front; Fender
- Position: Left
- Replaces: BCJH-52-210
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: TK48-52-111G
$164.88 MSRP: $219.88
You Save: $55.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
- Replaces: TK48-52-111E, TK48-52-111F
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: CG36-52-111
$178.46 MSRP: $237.99
You Save: $59.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: CG36-52-211
$178.46 MSRP: $237.99
You Save: $59.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: CG37-52-111
$178.46 MSRP: $237.99
You Save: $59.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: CG37-52-211
$179.39 MSRP: $239.23
You Save: $59.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: BAYR-52-21Y
$180.83 MSRP: $241.16
You Save: $60.33 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Left. Front
- Position: Left
- Replaces: B3YF-52-21Y, B37F-52-211
Fits the following Mazda Models:
- 3 | 2007-2009 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda Fender Part Number: C236-52-211C
$183.43 MSRP: $244.61
You Save: $61.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
- Replaces: CDY4-52-200, C236-52-211B
Fits the following Mazda Models:
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Fender Part Number: BDMT-52-210
$200.74 MSRP: $267.70
You Save: $66.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front; Fender
- Position: Left
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: BDMT-52-110
$204.80 MSRP: $273.12
You Save: $68.32 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front; Fender
- Position: Right
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda Fender Part Number: N243-52-111A
$214.58 MSRP: $286.16
You Save: $71.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
- Replaces: N243-52-111
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Fender Part Number: N243-52-211A
$214.58 MSRP: $286.16
You Save: $71.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
- Replaces: N243-52-211
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Fender Part Number: D651-52-111C
$221.59 MSRP: $295.50
You Save: $73.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
- Replaces: D651-52-111B
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Fender Part Number: D651-52-211C
$223.64 MSRP: $298.25
You Save: $74.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
- Replaces: D01G-52-211B, D651-52-211B
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Fender Part Number: BN8V-52-111D
$224.48 MSRP: $299.36
You Save: $74.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Right, Fender Front
- Position: Right
- Replaces: BN8V-52-111C, BN8V-52-111B
Fits the following Mazda Models:
- 3 | 2004-2009 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Fender Part Number: NCY0-52-110F
$225.96 MSRP: $301.34
You Save: $75.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Right, Fender Front
- Position: Right
- Replaces: NCY0-52-110E
Fits the following Mazda Models:
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Fender Part Number: C235-52-211C
Product Specifications
- Other Name: Panel(Left), Fender-Front
- Position: Left
- Replaces: CDY3-52-200, C235-52-211B
Fits the following Mazda Models:
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Fender Part Number: BAYR-52-11Y
Product Specifications
- Other Name: Fender, Right. Front
- Position: Right
- Replaces: B3YF-52-11Y, B37F-52-111
Fits the following Mazda Models:
- 3 | 2007-2009 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda Fender Part Number: C236-52-111C
Product Specifications
- Other Name: Panel(Right), Fender-Front
- Position: Right
- Replaces: C236-52-111B, CDY4-52-100
Fits the following Mazda Models:
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS

| Page 1 of 7 |Next >

1-20 of 125 Results

Mazda Fender

Mazda Fender is a robust shield between the body and gravel, water, and mud that comes into contact with the paint and nearby traffic in an attempt to save paint and safety. Mazda cars are notable for the lively handling, Kodo design which makes every surface feel in motion, and Skyactiv engines which sip fuel while still feeling energetic. Since Mazda started producing cars in 1931, they have been chasing innovation from rotary power in the 1960s to today's mild hybrid and electric systems, and their i-Activsense suite provides lane-keep support, radar cruise, and available all-wheel drive that was tested on rough trails, proving that Mazda has a passion for both excitement and protection. Drivers rave about how each Mazda combines efficiency, responsive steering, and a cabin that is designed to be connected. Turning back to the Fender, the panel curves tight around the wheel arch to smooth out the airflow for the benefit of the vehicle in maintaining its aerodynamic edge as well as reducing wind noise at speed. The Fender also points kicked-up debris downwards so that the chips that may start rusting are removed and durability is maintained through the entire range, whether it is a compact hatchback or a spacious SUV. Because it bolts to the unibody, replacing a single panel restores fit and finish without upsetting the rest of the vehicle, so the car can quickly regain its clean profile, and strong steel or composite construction allows it to absorb minor bumps, limiting costly repairs and keeping daily adventures worry-free.

You'll get great performance and real durability when you pick genuine OEM Fender. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Fender Parts and Q&A

Fender
BN8V-52-111D
Q: How to remove and install a fender on Mazda 3?
A:
Unplug the cable of the negative battery terminal. Unscrew the lug nuts of the front wheel, lift up the vehicle and place it firmly on jackstands and take off the front wheel. You should take off the splash shield, inner fender splash shield, inner fenderwell, fasteners and the front part of the splash shield. It is possible that some of the models may have a front mud guard attached to the inner fenderwell, which must first be removed by removing three of the side mounting fasteners and one below. Take off front bumper cover. Remove headlight and side markers light assemblies. While standing in front of the fender, take out the mounting bolt in the side corner of the fender. Take out the windshield wipers. Unscrew the two bottom fender bolts; on certain models a side step molding may be over the top of these bolts, and this will have to be unscrewed by unscrewing its plastic fasteners and lifted back. Open the front door and take out the upper rear fender bolt out of the doorjamb. Unattach the fender upper bolts and then pick-up the fender, preferably with a helper to avoid damaging the adjacent body parts. The process of installing is the opposite of removing and in this process, one should ensure that there is a match between the fender and the hood and the front side of the door and then screw the bolts.
Fender
GK2A-52-111B
Q: How to remove and install a fender on Mazda 6?
A:
Firstly, take off the housing of the headlight. The next step is to unscrew the lug nuts of the front wheel, lift the car and place it resting on jackstands and take off the front wheel. Unscrew the fender splash shield fasteners that hold the inside fender splash shield in place. Subsequently, remove electrical connector on the front sidemarker light, as well as the front bracket fasteners. With 2009 model and onwards, the bottom two fender bolts are under a side molding; remove the plastic push-pins and peel away the end of the lower part of the fender modeling to expose the two lower fender bolts. Take your time when prying back the rocker panel so as to break the rocker panel-to-fender fasteners. Pop the front door to get the upper rear fender bolt out of the doorjamb. Next take off the upper fender bolts and inner fender rear bolt and the fender. One would also recommend that an assistant helps during the process of getting the fender off the car otherwise he or she may cause damage to the body panels to the surroundings. Last but not least is the installation, again, it is the opposite of removal; one should inspect the fit of the fender to the hood and front of the door to ensure that the bolts are tightened.