How to replace a Rack and Pinion Boot on Mazda 3?

Unscrew the lug nuts, lift the car and place it on jack stands. Take off splash covers and wheel. Unscrew tie-rod end and jam nut, cut off the inner boot clamp using diagonal cutters and slide off the boot. Prior to fitting the new boot, a sheath of tape is placed over the threads and serrations on the terminus of the steering rod so as not to harm the smaller end of the new boot. Install new clamps and insert the new boot on the rack and pinion until it fits into the groove on the steering rod. Take off the tape and fitting on the tie-rod end. Lastly, attach the wheel and lug nut, lower the car and tighten the lug nut to the required torque.

How to replace the Rack and Pinion Boot on Mazda 6?

Unscrew the lug nuts, lift the car and then hold it up using jack stands and then wring off the wheel. The second step is to take out the tie-rod end and jam nut. With a pair of pliers, take off the outer rack and pinion boot clamp and snip the inner boot clamp using diagonal cutters and slide off the boot. Prior to installation of the new boot, cover the threads and serrations on the end of the steering rod with an overlay of tape to avoid damages to the small end of the new boot. Install new clamps, insert the new boot into the rack and pinion until it fits into the groove of the steering rod. Once the tape is taken off, fit the tie-rod end. To sum up, the last step is to install the wheel and lug nuts, lower the vehicle and tighten the lug nuts to the torque required.

Genuine Mazda Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

53 Rack and Pinion Boots found

View related parts
Mazda Dust Cover Part Number: NE51-32-112
$7.14 MSRP: $9.52
You Save: $2.38 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Tie Rod Boot Part Number: BCKA-32-12X
$11.24 MSRP: $14.99
You Save: $3.75 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Boot Kit, Tie Rod Boot
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Dust Cover Part Number: F151-32-112
$15.76 MSRP: $21.02
You Save: $5.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Boot Part Number: F151-32-125
$19.04 MSRP: $25.38
You Save: $6.34 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Tie Rod Boot Part Number: N243-32-12X
$21.19 MSRP: $28.25
You Save: $7.06 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Tie Rod Boot
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Tie Rod Boot Part Number: BDTS-32-12X
$21.34 MSRP: $28.45
You Save: $7.11 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Boot Kit, Tie Rod Boot
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Boot Part Number: BP4L-32-125
$23.33 MSRP: $31.11
You Save: $7.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot
- Replaces: BBM4-32-12X, BP4L-32-12X
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015, 2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Boot Part Number: BP4L-32-12X
$23.33 MSRP: $31.11
You Save: $7.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot & Clamps-Steering Gear; Tie Rod Boot
- Replaced by: BP4L-32-125
Fits the following Mazda Models:
- 3 | 2004-2010 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Boot Part Number: EG21-32-125
$23.89 MSRP: $31.85
You Save: $7.96 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot
- Replaces: EG21-32-12X
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Boot Part Number: L208-32-125
$25.24 MSRP: $33.65
You Save: $8.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot, Tie Rod Boot
- Position: Right
- Replaces: L208-32-12X
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Dust Cover Part Number: DGH9-32-112
$26.53 MSRP: $35.38
You Save: $8.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust; Dust Cover
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Dust Cover Part Number: DFR5-32-112
$31.14 MSRP: $41.52
You Save: $10.38 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust; Dust Cover
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Boot Part Number: B25D-32-125
$29.99 MSRP: $39.99
You Save: $10.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot
- Position: Inner
Fits the following Mazda Models:
- Protege | 2001-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Dust Cover Part Number: BDTS-32-112C
$33.35 MSRP: $44.48
You Save: $11.13 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust; Dust Cover
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Boot Part Number: GJ25-32-125A
$32.15 MSRP: $42.88
You Save: $10.73 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Inner Tie Rod Boot, Tie Rod Boot
Fits the following Mazda Models:
- 626 | 1988-1992 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
- MX-6 | 1988-1992 | DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS
- Protege | 1999-2000 | DX, ES, LX | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View More
View related parts
Mazda Tie Rod Boot Part Number: D09H-32-12X
$34.88 MSRP: $46.52
You Save: $11.64 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Tie Rod Boot
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Dust Cover Part Number: BCKA-32-112C
$35.70 MSRP: $47.61
You Save: $11.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust; Dust Cover
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Boot Part Number: D653-32-12X
$38.96 MSRP: $51.97
You Save: $13.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Boot
- Replaces: D651-32-12X
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Dust Cover Part Number: EG21-32-112
$38.56 MSRP: $51.43
You Save: $12.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Dust Cover Part Number: GHT2-32-112
$46.75 MSRP: $62.34
You Save: $15.59 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
- Replaces: BJS7-32-112, BJS8-32-112, GHT2-32-112B, BJS7-32-112A
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS

| Page 1 of 3 |Next >

1-20 of 53 Results

Mazda Rack and Pinion Boot

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Rack and Pinion Boot. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Rack and Pinion Boots. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Rack and Pinion Boots. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Rack and Pinion Boot that keeps your car running like new.

Mazda Rack and Pinion Boot Parts and Q&A

Boot
BP4L-32-12X
Q: How to replace a Rack and Pinion Boot on Mazda 3?
A:
Unscrew the lug nuts, lift the car and place it on jack stands. Take off splash covers and wheel. Unscrew tie-rod end and jam nut, cut off the inner boot clamp using diagonal cutters and slide off the boot. Prior to fitting the new boot, a sheath of tape is placed over the threads and serrations on the terminus of the steering rod so as not to harm the smaller end of the new boot. Install new clamps and insert the new boot on the rack and pinion until it fits into the groove on the steering rod. Take off the tape and fitting on the tie-rod end. Lastly, attach the wheel and lug nut, lower the car and tighten the lug nut to the required torque.
Boot
GJ6A-32-12X
Q: How to replace the Rack and Pinion Boot on Mazda 6?
A:
Unscrew the lug nuts, lift the car and then hold it up using jack stands and then wring off the wheel. The second step is to take out the tie-rod end and jam nut. With a pair of pliers, take off the outer rack and pinion boot clamp and snip the inner boot clamp using diagonal cutters and slide off the boot. Prior to installation of the new boot, cover the threads and serrations on the end of the steering rod with an overlay of tape to avoid damages to the small end of the new boot. Install new clamps, insert the new boot into the rack and pinion until it fits into the groove of the steering rod. Once the tape is taken off, fit the tie-rod end. To sum up, the last step is to install the wheel and lug nuts, lower the vehicle and tighten the lug nuts to the torque required.