How to remove and install the rear sway bars and rear sway bar bushing on Mazda 3?

Removal of the rear Sway Bars requires first loosening of the rear wheel lug nuts, elevating the rear of the vehicle and placing it firmly on jackstands ensuring that the front wheels are blocked so that it does not roll. The next step is to loosen the links of the Sway Bars to the bar and lower suspension arms by using an Allen wrench to hold the ballstud in case the latter turns during the process. The Sway Bars bushing clamps are unbolted and the Sway Bars is directed out of between the subframe and the EVAP shield and the EVAP shield mounting bolts are removed so that the Sway Bars is able to move. When the Sway Bars is disengaged, remove the retainer bushings and examine them to make sure they are not cracked, worn, or otherwise worn out and replace them if needed. Wipe a stiff wire brush to clean the bushing part of the Sway Bars. To install, apply a lot of vegetable oil to the inside and outside of the new bushing to make the reassembly easier, the slits of the bushings should also point towards the front of the car. At last, assemble the parts in the order in which they were removed and screw the connections to the required torque values.

How to remove and install the Sway Bars and Sway Bar Bushing components of a vehicle's front subframe on Mazda 6?

The first step to take in order to remove the components is to loosen front wheel lug nuts, lift the front of the vehicle and sustain it on jackstands with the application of parking brake and blocking of rear wheels. The second step is to unscrew the front wheels and take off the sway bar links with the bar with the help of an Allen wrench to hold the stud in case the ballstud rotates around the nut. Unhook the steering shaft and steering gear, but make sure not to turn the steering wheel in order to prevent rupture of the airbag clock spring. Next, loosen the tie-rod ends inserting the steering knuckles and take away the steering gear bolts. Separate the exhaust pipe/s off the exhaust manifold/s and hold the back of the subframe up with a floor jack. Relax the front sub frame mounting fasteners, strip the back sub frame fasteners and use the jack to lower the back of the sub frame. Unscrew the sway bar bushing clamps and direct the Sway Bars out of the subframe body. When the sway bar is not connected, drop off the retainer bushings and examine them to see if they are cracked or worn and change them as needed. Wipe the sway bar bushing area using a stiff wire brush to clean it off. During installation, grease the interior and exterior of the new bushing using vegetable oil in order to help in reassembling the bushing with the slits of the bushings oriented at the rear of the car. Lastly, removal is the opposite of installation and fasteners are supposed to be tightened at the required torque levels.

Genuine Mazda Sway Bars

Stabilizer Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

135 Sway Bars found

View related parts
Mazda Stabilizer Bar Part Number: NE51-34-151A
$135.16 MSRP: $180.26
You Save: $45.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: NE51-34-151
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KD35-28-151
$111.24 MSRP: $148.34
You Save: $37.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: KBH8-28-151
Fits the following Mazda Models:
- CX-5 | 2020-2021, 2013-2018 | Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: NE51-28-151A
$81.08 MSRP: $108.13
You Save: $27.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: NE51-28-151
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: TK48-34-151
$187.09 MSRP: $249.50
You Save: $62.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: BJS7-34-151A
$71.60 MSRP: $95.49
You Save: $23.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: BJS7-34-151
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KD35-34-151
$109.83 MSRP: $146.47
You Save: $36.64 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: GMD9-34-151A
$153.43 MSRP: $204.60
You Save: $51.17 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- 6 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2021 | Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: N023-28-151A
$95.30 MSRP: $218.92
You Save: $123.62 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: N023-28-151
Fits the following Mazda Models:
- Miata | 1999-2005, 1993-1997 | 10th Anniversary, Base, LE, LS, M Edition, Mazdaspeed, SE, STO, Shinsen | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Stabilizer Bar Part Number: BJS7-28-151
$84.78 MSRP: $113.06
You Save: $28.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KD31-28-151
$106.00 MSRP: $141.37
You Save: $35.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: KBH5-28-151
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2021 | Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2021 | Carbon Edition, Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Stabilizer Bar Part Number: B45A-28-151
$108.85 MSRP: $145.16
You Save: $36.31 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2019 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer, Front Part Number: KJK3-34-15XA
$355.13 MSRP: $473.59
You Save: $118.46 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STABILIZER,FRONT; Stabilizer Bar
- Position: Front
- Replaces: KJK3-34-15X
Fits the following Mazda Models:
- CX-70 | 2025 | Turbo, Turbo S | 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
- CX-90 | 2024-2025 | Turbo, Turbo S | 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mazda Stabilizer Bar Part Number: NC12-28-151A
$41.28 MSRP: $54.18
You Save: $12.90 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Stabilizer Bar Part Number: NF53-28-151C
$84.34 MSRP: $112.48
You Save: $28.14 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: NF53-28-151B
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: BP4K-28-151C
$88.34 MSRP: $117.81
You Save: $29.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: BP4K-28-151B
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Stabilizer Bar Part Number: EG21-28-151
$94.23 MSRP: $125.65
You Save: $31.42 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: D09V-34-151
$100.36 MSRP: $133.84
You Save: $33.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: DF71-34-151A
$101.53 MSRP: $135.40
You Save: $33.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: DF71-34-151
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: GEL6-34-151
$101.65 MSRP: $135.57
You Save: $33.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: GS4H-34-151
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
View related parts
Mazda Stabilizer Bar Part Number: B45A-34-151
$102.19 MSRP: $136.28
You Save: $34.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 7 |Next >

1-20 of 135 Results

Mazda Sway Bars

The Mazda Sway Bars minimize body roll so every corner feels sharp and controlled, creating confidence that the car will stay level and predictable. Mazda believes that driving should be a living experience and this philosophy is translated in their vehicles. This shows through the sophisticated KODO styling, fuel-saving SKYACTIV motors, and the responsive i-ACTIV all-wheel drive system that grips the pavement safely. Mazda includes features like radar cruise and lane keep assistance under the i-ACTIVSENSE umbrella to help make longer journeys more calm, while high-quality cabin materials maintain that sporty character. From being the pioneer of rotary-powered icons to experimenting with mild hybrids today, Mazda has been helping develop lighter and more efficient yet fun cars that are different and stand out. This energetic attitude helps owners achieve lasting value without sacrificing excitement. Across the entire lineup, the Sway Bars are fitted with the same kind of spirit. Every bar is an inert steel rod that runs left to right at the suspension. They are held in place by tough rubber bushes and hooked to a control arm via stout end link. When one wheel rises up and over a bump, the bar twists and sends some force to the opposite side. This helps to fight lean, keep the tires flat on the road, and ease stress on other suspension parts. A quick visual check will reveal cracked bushings or loose links, and a healthy set of Sway Bars helps your Mazda corner with poise and even tire wear.

You'll get great performance and real durability when you pick genuine OEM Sway Bars. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Sway Bars Parts and Q&A

Stabilizer Bar
BBM2-28-151A
Q:
How to remove and install the rear sway bars and rear sway bar bushing on Mazda 3?
A:
Removal of the rear Sway Bars requires first loosening of the rear wheel lug nuts, elevating the rear of the vehicle and placing it firmly on jackstands ensuring that the front wheels are blocked so that it does not roll. The next step is to loosen the links of the Sway Bars to the bar and lower suspension arms by using an Allen wrench to hold the ballstud in case the latter turns during the process. The Sway Bars bushing clamps are unbolted and the Sway Bars is directed out of between the subframe and the EVAP shield and the EVAP shield mounting bolts are removed so that the Sway Bars is able to move. When the Sway Bars is disengaged, remove the retainer bushings and examine them to make sure they are not cracked, worn, or otherwise worn out and replace them if needed. Wipe a stiff wire brush to clean the bushing part of the Sway Bars. To install, apply a lot of vegetable oil to the inside and outside of the new bushing to make the reassembly easier, the slits of the bushings should also point towards the front of the car. At last, assemble the parts in the order in which they were removed and screw the connections to the required torque values.
Stabilizer Bar
GK2C-34-151B
Q:
How to remove and install the Sway Bars and Sway Bar Bushing components of a vehicle's front subframe on Mazda 6?
A:
The first step to take in order to remove the components is to loosen front wheel lug nuts, lift the front of the vehicle and sustain it on jackstands with the application of parking brake and blocking of rear wheels. The second step is to unscrew the front wheels and take off the sway bar links with the bar with the help of an Allen wrench to hold the stud in case the ballstud rotates around the nut. Unhook the steering shaft and steering gear, but make sure not to turn the steering wheel in order to prevent rupture of the airbag clock spring. Next, loosen the tie-rod ends inserting the steering knuckles and take away the steering gear bolts. Separate the exhaust pipe/s off the exhaust manifold/s and hold the back of the subframe up with a floor jack. Relax the front sub frame mounting fasteners, strip the back sub frame fasteners and use the jack to lower the back of the sub frame. Unscrew the sway bar bushing clamps and direct the Sway Bars out of the subframe body. When the sway bar is not connected, drop off the retainer bushings and examine them to see if they are cracked or worn and change them as needed. Wipe the sway bar bushing area using a stiff wire brush to clean it off. During installation, grease the interior and exterior of the new bushing using vegetable oil in order to help in reassembling the bushing with the slits of the bushings oriented at the rear of the car. Lastly, removal is the opposite of installation and fasteners are supposed to be tightened at the required torque levels.