How to remove and install an A/C condenser on Mazda 3?

The first thing to do is to empty the air conditioning system of an automotive air conditioning technician. The second step is to take out the battery cover and take off the cable connected to the negative battery terminal. Lift the vehicle and place it safely on jackstands after which the splash shields are removed. Drain the cooling system, reusing and saving the coolant in case it is in fairly new condition and relatively new. Go ahead to take out the battery cooling duct and the engine cooling fan assembly. Disassemble pipes of the refrigerant inlet and outlet of the A/C Condenser by taking off the bolt or nut that has attached the two pipes into the block of the condenser and cover the lines to avoid contamination. Disassemble the radiator and condenser then on models with automatic transaxles, disconnect the lines of the transmission cooler to the radiator. Unscrew the radiator hook and lift the condenser off the radiator and store it with the line fittings facing up in case it is to be re-used. When putting in a new condenser, before fitting the condenser, the right kind of refrigerant oil should be poured into the condenser. Install the condenser to the radiator, lubricate new O-rings with refrigerant oil and insert them to refrigerant line fittings. Refrigerant lines should be reconnected to the condenser and the inlet and outlet nut tightened. Lastly, the removal is the opposite of installation, and evacuation, recharging, and leak testing done by the shop which emptied it.

How to properly discharge, remove, and replace an A/C condenser on Mazda Protege?

Start with evacuating the refrigerant and refilling it through a repair center that is qualified. Then take off the radiator grille. In models that are between 1990 and 1994, remove the receiver/drier. Next, pull out the undercover shield under the vehicle and fit a protection piece to the fin like a piece of cardboard between the radiator and the A/C condenser. To make the models of 1990 to 1994, take out the radiator, whereas in the 1999 and subsequent models, the radiator is not required, but the air cleaner box and coolant reservoir is required to be removed, and then you should disconnect the MAF sensor. Disassemble the condenser inlet and outlet fittings, seal the open fittings so that there is no potential contamination or moisture buildup. Next, remove the A/C condenser and examine it for cracks, damages, leakages of refrigerant, bent fins, and any distortion or damages of the inlet and outlet. Service or change the condenser. Removal is reversed then followed by installation making sure that any O-rings you may have are removed and replaced by new ones depending on the type of refrigerant you are using in your system and lubricated with refrigerant oil prior to installation. Lastly, get the same shop that empties that tests the system and seals any gaps that were not previously sealed. Assuming the replacement of the condenser, the shop should pour refrigerant oil in models between 1990 to 1994, and in models between 1995 and 2005 on the high pressure side of the compressor using only compatible refrigerant oil.

Genuine Mazda A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

52 A/C Condensers found

View related parts
Mazda Condenser Part Number: TK21-61-480
$677.21 MSRP: $925.33
You Save: $248.12 (27%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- CX-9 | 2013-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.7 L GAS
View related parts
Mazda Condenser Part Number: TD11-61-480A
$698.13 MSRP: $953.92
You Save: $255.79 (27%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- CX-9 | 2007-2012 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Condenser Part Number: EH44-61-480A
$773.82 MSRP: $1057.35
You Save: $283.53 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: EGY1-61-48ZC, EGY1-61-48ZB, EHY4-61-48Z, EH44-61-480
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: GJYG-61-48Z
$727.43 MSRP: $993.95
You Save: $266.52 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser & Oil Set
Fits the following Mazda Models:
- 6 | 2006-2007 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Condenser Part Number: T0Y1-61-48Z
$953.81 MSRP: $1303.28
You Save: $349.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser & Oil Set
Fits the following Mazda Models:
- Millenia | 2001-2002 | Base, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Condenser Assembly Part Number: VA45-61-480A
$214.01 MSRP: $285.41
You Save: $71.40 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser; Condenser Assembly
- Replaced by: VA45-61-480B
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Assembly Part Number: VA54-61-480A
$217.95 MSRP: $290.66
You Save: $72.71 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser; Condenser Assembly
- Replaced by: VA54-61-480B
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: KD62-61-480A
$214.56 MSRP: $286.14
You Save: $71.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Condenser Part Number: 1F70-61-480A
$250.00 MSRP: $333.40
You Save: $83.40 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 1F01-61-480, 1F70-61-480
Fits the following Mazda Models:
- B4000 | 2003-2009 | Base, DS, SE | 6 Cyl 4.0 L GAS
View related parts
Mazda Condenser Part Number: BJ0E-61-480A
$243.20 MSRP: $324.33
You Save: $81.13 (26%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- Protege | 1999-2000 | DX, ES, LX | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Condenser Part Number: GEG1-61-480
$278.40 MSRP: $371.27
You Save: $92.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- 6 | 2011-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Condenser Part Number: BDMN-61-480A
$336.51 MSRP: $448.77
You Save: $112.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: B25F-61-480B
$321.51 MSRP: $428.77
You Save: $107.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: B25F-61-480, B25P-61-480, B25P-61-480A, B25F-61-480A
Fits the following Mazda Models:
- Protege | 2001-2002 | DX, ES, LX, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Mazda Condenser Part Number: KD45-61-480A
$366.61 MSRP: $488.91
You Save: $122.30 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly
Fits the following Mazda Models:
- CX-5 | 2021-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: TC3M-61-480
$345.28 MSRP: $460.45
You Save: $115.17 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: TK48-61-480
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: GHR1-61-480B
$371.30 MSRP: $495.16
You Save: $123.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly
- Replaces: BJS8-61-480, GHR1-61-480, GHR1-61-480A
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: BDWK-61-480B
$370.39 MSRP: $493.94
You Save: $123.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly
- Replaces: BDWK-61-480A, BDWK-61-480
Fits the following Mazda Models:
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Condenser Part Number: N243-61-480
$380.98 MSRP: $512.17
You Save: $131.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Condenser Part Number: DB3R-61-480A
$309.73 MSRP: $413.05
You Save: $103.32 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: DB3R-61-480
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Condenser Part Number: BBM4-61-480D
$470.07 MSRP: $631.94
You Save: $161.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly
- Replaces: BBM4-61-480B, BBM4-61-480C
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 3 |Next >

1-20 of 52 Results

Mazda A/C Condenser

The Mazda A/C Condenser rapidly converts hot refrigerant vapor into cool liquid, allowing the air conditioning system to provide crisp air in the cabin during the hot afternoons. Mazda started making vehicles in 1931 and made a big splash with its rotary engine, a symbol of how the company loves some cool tech that makes driving feel exciting. Today Mazda blends its Skyactiv engines, responsive transmissions, and Kodo styling to create cars that are fuel-sipping while looking athletic simultaneously. Safety is enhanced with i-Activsense assists, while available electric drives and i-Activ AWD prove that Mazda is continuing to press for cleaner power and constant grip on any road. Matching that spirit of efficiency, the A/C Condenser has light aluminum, slim tubes, and tight fins so it dumps heat fast without adding much weight. Placed in front of the radiator, the A/C Condenser receives the first rush of outside air; therefore, the refrigerant is cooled and condensed before going on to the rest of the climate system. Its corrosion-resistant construction manages the road spray and winter salt, and its tried and tested tube-and-fin pattern fits neatly across the entire Mazda lineup. By keeping energy demand low and cabin comfort high, this small part plays a big role in the lasting reliability and everyday pleasure drivers expect.

You'll get great performance and real durability when you pick genuine OEM A/C Condenser. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda A/C Condenser Parts and Q&A

Condenser
BP4K-61-480D
Q: How to remove and install an A/C condenser on Mazda 3?
A:
The first thing to do is to empty the air conditioning system of an automotive air conditioning technician. The second step is to take out the battery cover and take off the cable connected to the negative battery terminal. Lift the vehicle and place it safely on jackstands after which the splash shields are removed. Drain the cooling system, reusing and saving the coolant in case it is in fairly new condition and relatively new. Go ahead to take out the battery cooling duct and the engine cooling fan assembly. Disassemble pipes of the refrigerant inlet and outlet of the A/C Condenser by taking off the bolt or nut that has attached the two pipes into the block of the condenser and cover the lines to avoid contamination. Disassemble the radiator and condenser then on models with automatic transaxles, disconnect the lines of the transmission cooler to the radiator. Unscrew the radiator hook and lift the condenser off the radiator and store it with the line fittings facing up in case it is to be re-used. When putting in a new condenser, before fitting the condenser, the right kind of refrigerant oil should be poured into the condenser. Install the condenser to the radiator, lubricate new O-rings with refrigerant oil and insert them to refrigerant line fittings. Refrigerant lines should be reconnected to the condenser and the inlet and outlet nut tightened. Lastly, the removal is the opposite of installation, and evacuation, recharging, and leak testing done by the shop which emptied it.
Condenser
B25F-61-480B
Q: How to properly discharge, remove, and replace an A/C condenser on Mazda Protege?
A:
Start with evacuating the refrigerant and refilling it through a repair center that is qualified. Then take off the radiator grille. In models that are between 1990 and 1994, remove the receiver/drier. Next, pull out the undercover shield under the vehicle and fit a protection piece to the fin like a piece of cardboard between the radiator and the A/C condenser. To make the models of 1990 to 1994, take out the radiator, whereas in the 1999 and subsequent models, the radiator is not required, but the air cleaner box and coolant reservoir is required to be removed, and then you should disconnect the MAF sensor. Disassemble the condenser inlet and outlet fittings, seal the open fittings so that there is no potential contamination or moisture buildup. Next, remove the A/C condenser and examine it for cracks, damages, leakages of refrigerant, bent fins, and any distortion or damages of the inlet and outlet. Service or change the condenser. Removal is reversed then followed by installation making sure that any O-rings you may have are removed and replaced by new ones depending on the type of refrigerant you are using in your system and lubricated with refrigerant oil prior to installation. Lastly, get the same shop that empties that tests the system and seals any gaps that were not previously sealed. Assuming the replacement of the condenser, the shop should pour refrigerant oil in models between 1990 to 1994, and in models between 1995 and 2005 on the high pressure side of the compressor using only compatible refrigerant oil.