How to replace the batteries and access the battery trays on Mazda 3?

To change the batteries, the first step will be to pull the retaining tabs back to take out the battery cover and then, disconnect the cable to the negative terminal and the positive terminal. The second step is to take off the battery hold-down clamp and then take off the heavy batteries with great care. In case of replacement, make sure that the new batteries are same in terms of dimensions, amperage rating and cold cranking rating and attach heat shield of old batteries to the new ones. To install, use the same procedure in the reverse order i.e. connect the positive cable first and the negative cable last. In order to reach the battery tray, remove the batteries first, followed by removing the battery tray mounting fasteners and lift the tray. Disassemble the PCM cover and fasteners without unconnecting the PCM connectors and to install the PCM, repeat the same process in reverse order, first connect the positive cable to the PCM and the last to be connected is the negative cable.

How to access the batteries and battery trays on Mazda Tribute?

In 2013 and later models, the air filter housing components may be removed to reach the batteries. All the models: remove the battery cover or the protective cover on the positive battery terminal. To remove the two hold-down nuts and bracket, first disconnect the negative cable, then the positive cable; first disconnect the negative battery cable, and then the positive battery cable, then remove the batteries out of the tray. On a 2013 model (and subsequent) disconnect the Battery Monitoring Sensor (BSM) connector and remove the wiring harness out of the Battery Junction Box (BJB) and attach the harness to the side. Unload the clips then push the BJB upwards to separate it with the battery box. Take out the hold-down nuts and bracket and take out the batteries. In models 2012 and earlier, when it is necessary to access the components below the battery tray, loosen the bolts connecting the tray, dismiss the connection between the tray and any component, and extract the tray. On 2013 models and newer, loosen the brake master cylinder remote fluid reservoir to the cowl panel and set it aside, loosen the transaxle fluid cooler control valve on the side of the battery tray, loosen the fasteners and lead the tray out underneath the cowl. The opposite of removal is installation. Once the procedure has been done on the 2012 and older models, the Powertrain Control Module (PCM) needs to reschedule its idle and fuel trim plan so that it can perform optimally. Calibration of the cluster display of 2008 to 2012 models To calibrate cluster display, after reconnecting batteries, switch the instrument panel dimmer to dome On and then rotate the dimmer switch to the lowest state. Provided that new batteries are fitted to 2013 and beyond models, it is advisable to undertake the BSM relearn procedure and in those models with One-Touch Open and Close power windows, initialize the power window system.

Genuine Mazda Battery Trays

Battery Tray

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

45 Battery Trays found

View related parts
Mazda Battery Tray Part Number: GS3L-56-040C
$18.61 MSRP: $24.82
You Save: $6.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
- Replaces: GS3L-56-040B, GS3L-56-040A
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Battery Tray Part Number: EC02-56-041C
$37.08 MSRP: $49.44
You Save: $12.36 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier, Battery
- Replaces: EC02-56-041B, EC02-56-041A
Fits the following Mazda Models:
- Tribute | 2008-2011, 2001-2004 | DX, ES, i, LX, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Battery Tray Part Number: VA45-56-040A
$49.08 MSRP: $65.45
You Save: $16.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaced by: VA85-56-040
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: VA44-56-040A
$61.10 MSRP: $81.48
You Save: $20.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaced by: VA84-56-040
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: KE52-56-041B
$48.05 MSRP: $64.08
You Save: $16.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Battery Tray Part Number: N243-56-041A
$51.59 MSRP: $68.79
You Save: $17.20 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Battery Tray Part Number: D09H-56-040
$53.60 MSRP: $71.48
You Save: $17.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Battery Tray Part Number: NE51-56-041B
$54.56 MSRP: $72.77
You Save: $18.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
- Replaces: NE51-56-041
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Battery Tray Part Number: DF71-56-041C
$52.30 MSRP: $69.75
You Save: $17.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Battery Tray Part Number: TK78-56-040
$54.84 MSRP: $73.14
You Save: $18.30 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaces: TK48-56-040B
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2024 | 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Battery Tray Part Number: B45A-56-040A
$57.38 MSRP: $76.52
You Save: $19.14 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
Fits the following Mazda Models:
- 3 | 2016-2018 | Grand Touring, i Grand Touring, I Sport, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: KD53-56-040C
$58.18 MSRP: $77.59
You Save: $19.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaces: KD53-56-040A, KD53-56-040B, BJS7-56-040
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2024 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Battery Tray Part Number: EG22-56-041F
$56.74 MSRP: $75.67
You Save: $18.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier, Battery
- Replaces: EG22-56-041E
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: BBM2-56-980E
$65.80 MSRP: $87.74
You Save: $21.94 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
- Replaces: BBM2-56-980C, BBM2-56-980A, BBM2-56-980D
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: BDTS-56-040B
$65.98 MSRP: $87.98
You Save: $22.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaces: BCJH-56-040, BDTS-56-040A, BCJH-56-040A
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 S, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: T002-56-980
$62.53 MSRP: $83.38
You Save: $20.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
Fits the following Mazda Models:
- Millenia | 1996-2002 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: BFWM-56-040A
$67.81 MSRP: $90.43
You Save: $22.62 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery; Battery Tray
- Replaces: BFWM-56-040
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Battery Tray Part Number: L206-56-041F
$70.28 MSRP: $93.71
You Save: $23.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier, Battery
- Replaces: L206-56-041E
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Battery Tray Part Number: F151-56-040F
$106.46 MSRP: $141.98
You Save: $35.52 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray, Battery
- Replaces: F151-56-040E, F151-56-041B
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Battery Tray Part Number: B26E-56-041D
Product Specifications
- Other Name: Tray, Battery
- Replaces: B26E-56-041C, B26E-56-041B
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS

| Page 1 of 3 |Next >

1-20 of 45 Results

Mazda Battery Trays

Mazda Battery Trays hold the battery in place to protect it from vibration and also support the exciting drive owners expect. Mazda began shaping its reputation in 1931 and solidified global fame through the rotary engine, then honed efficiency with Skyactiv powertrains that sip fuel yet deliver punchy response, all encased in Kodo design that makes each panel appear to breathe and enhanced with i-Activsense safety gear that watches lanes, scans traffic, and backs up with confidence. The company also explores electric drive, mild hybrids, and i-Activ AWD control so its cars stay sure-footed on rough tracks, balancing innovation and fun-to-drive spirit that will encourage young drivers to smile every time they press the accelerator. While its engines, styling, and tech get the headlines, simple components such as the Mazda Battery Trays quietly protect vital current for every startup. Built in the form of a rigid pan, each tray holds the energy cell in place, prevents rusting, and directs any acid drips away from wiring, preventing cracks, shorts, or loose terminals that could leave a car stranded. With fitments designed to be in keeping with the entire range, drivers can easily and swiftly replace a worn-out tray, paying little money while increasing battery life and the stability of the electrical output. For a young driver, that commitment is a broader Mazda promise of reliability. Regular inspections of these Mazda Battery Trays will ensure that the clamps remain clean and labels are legible so that routine voltage tests can be easily performed without the unexpected roadside drama.

You'll get great performance and real durability when you pick genuine OEM Battery Trays. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Battery Trays Parts and Q&A

Battery Holder
BP4K-56-040M
Q: How to replace the batteries and access the battery trays on Mazda 3?
A:
To change the batteries, the first step will be to pull the retaining tabs back to take out the battery cover and then, disconnect the cable to the negative terminal and the positive terminal. The second step is to take off the battery hold-down clamp and then take off the heavy batteries with great care. In case of replacement, make sure that the new batteries are same in terms of dimensions, amperage rating and cold cranking rating and attach heat shield of old batteries to the new ones. To install, use the same procedure in the reverse order i.e. connect the positive cable first and the negative cable last. In order to reach the battery tray, remove the batteries first, followed by removing the battery tray mounting fasteners and lift the tray. Disassemble the PCM cover and fasteners without unconnecting the PCM connectors and to install the PCM, repeat the same process in reverse order, first connect the positive cable to the PCM and the last to be connected is the negative cable.
Battery Tray
EC02-56-041C
Q: How to access the batteries and battery trays on Mazda Tribute?
A:
In 2013 and later models, the air filter housing components may be removed to reach the batteries. All the models: remove the battery cover or the protective cover on the positive battery terminal. To remove the two hold-down nuts and bracket, first disconnect the negative cable, then the positive cable; first disconnect the negative battery cable, and then the positive battery cable, then remove the batteries out of the tray. On a 2013 model (and subsequent) disconnect the Battery Monitoring Sensor (BSM) connector and remove the wiring harness out of the Battery Junction Box (BJB) and attach the harness to the side. Unload the clips then push the BJB upwards to separate it with the battery box. Take out the hold-down nuts and bracket and take out the batteries. In models 2012 and earlier, when it is necessary to access the components below the battery tray, loosen the bolts connecting the tray, dismiss the connection between the tray and any component, and extract the tray. On 2013 models and newer, loosen the brake master cylinder remote fluid reservoir to the cowl panel and set it aside, loosen the transaxle fluid cooler control valve on the side of the battery tray, loosen the fasteners and lead the tray out underneath the cowl. The opposite of removal is installation. Once the procedure has been done on the 2012 and older models, the Powertrain Control Module (PCM) needs to reschedule its idle and fuel trim plan so that it can perform optimally. Calibration of the cluster display of 2008 to 2012 models To calibrate cluster display, after reconnecting batteries, switch the instrument panel dimmer to dome On and then rotate the dimmer switch to the lowest state. Provided that new batteries are fitted to 2013 and beyond models, it is advisable to undertake the BSM relearn procedure and in those models with One-Touch Open and Close power windows, initialize the power window system.