How to remove and install the airbag module and steering wheel on Mazda 3?

In order to pull out the airbag module, I would first switch the ignition key to Off, and also disconnect the negative battery cable. The second step will be to straighten the steering wheel to ensure the straightness of the wheels and to remove the key. Removing the hole covers on both sides of the steering wheel and unscrewing the airbag module mounting fasteners, grip the module slightly out of the wheel on one side, and then repeat on the other side. Disconnect electrical connectors by lifting connector locks and then place airbag module in a safe place. Make matchmarks on the steering shaft and the wheel, then remove the steering wheel mounting nut and rock the steering wheel to loosen up and make sure to feed the wires and connectors as you do the same. Tape the clockspring to ensure it does not turn around because turning the steering shaft during the removal of the wheel and airbag would end up damage. In case the clockspring has to be removed, remove the steering column covers then turn the inner rotor clockwise until it stops then turn it anti-clockwise 2-3/4 turns, matching the marks on the clockspring and outer housing. Installation can be done by passing the wiring and airbag connection through the wheel, re-inserting the steering wheel back onto the shaft matching the match marks and connecting the mounting nut to the desired torque. Lastly, attach the connectors to the airbag module with the safety tabs up, and as per the color-coding of the airbag connectors, connect the module down to the wheel and until the connecting clips fit.

How to remove and install the airbag module and steering wheel on Mazda 6?

The airbag module should be removed and to do so firstly turn off the ignition key and then disconnect the negative battery cable and wait at least two minutes before removing it. The second step is to turn the steering wheel to face the wheels directly forward and take out the key. With a small screwdriver, loosen the plastic covers of the airbag module mounting bolts on the steering wheel on either side then remove the bolts and carefully pull the airbag module off the steering wheel on either side. Tear the connector locks and pull out the electrical connectors of the airbag module, and then remove the airbag and put it in a safe and isolated location. Mark match positions on the steering shaft and wheel and unscrew steering wheel mounting nut and shake wheel until it breaks free of the steering shaft, guiding the wires and connector attachments out of the wheel as you do so. Tape the clock spring to help it not rotate with care not to rotate the steering shaft with the wheel and airbag off or it will break the clock spring. The clock spring: remove the steering column covers, disconnect, and screw remove the steering column. To install, should the clock spring have been removed install it now and center by turning the inner rotor counter clockwise until resistance is experienced then turn counter clockwise about 2 to 2-1/4 turns and place the electrical connector where the 12 o clock mark is. Installation of the wheel requires wiring and air bag connectors to be run through the wheel, the steering wheel on the steering shaft to fit the match marks and the steering wheel nut to be attached to the required torque. The rest of the installation procedures are simply the reverse process of the steps to be performed to remove them, the connectors must be installed properly on the airbag module by positioning with the safety tabs facing up, matching the color-coding of the airbag connector and ensure that the airbag module is firmly clamped down towards the wheel until the retaining clips lock.

Genuine Mazda Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

133 Steering Wheels found

View related parts
Mazda Steering Wheel Part Number: GHY2-32-982
$489.92 MSRP: $658.64
You Save: $168.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel; Steering Wheel
- Replaces: GHR1-32-982, GHY1-32-982, GHR1-32-982A, GHR1-32-982B
Fits the following Mazda Models:
- 6 | 2014-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Steering Wheel Part Number: BBN6-32-982-02
$697.23 MSRP: $952.69
You Save: $255.46 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Steering Wheel Part Number: EH44-32-982
$688.87 MSRP: $941.27
You Save: $252.40 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- CX-7 | 2010-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Steering Wheel Part Number: N244-32-982-02
$767.31 MSRP: $1048.44
You Save: $281.13 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- MX-5 Miata | 2016-2020 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Steering Wheel Part Number: NH57-32-982
$761.32 MSRP: $1040.26
You Save: $278.94 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- MX-5 Miata | 2011-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Steering Wheel Part Number: TM53-32-98XA-02
$801.58 MSRP: $1095.27
You Save: $293.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Steering Wheel; Steering Wheel
Fits the following Mazda Models:
- CX-9 | 2018-2020 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Steering Wheel Part Number: CD88-32-980
$839.42 MSRP: $1146.98
You Save: $307.56 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- 5 | 2008-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Steering Wheel Part Number: F157-32-980E-23
$1029.92 MSRP: $1407.28
You Save: $377.36 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
- Replaces: F157-32-980A-23, F157-32-980D-23
Fits the following Mazda Models:
- RX-8 | 2004-2008 | 40th Anniversary Edition, Base, Grand Touring, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Steering Wheel Part Number: NE02-32-980
$1044.08 MSRP: $1426.62
You Save: $382.54 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
- Replaces: NE01-32-980
Fits the following Mazda Models:
- Miata | 2004-2005 | Base, LS, Mazdaspeed | 4 Cyl 1.8 L GAS
View related parts
Mazda Steering Wheel Part Number: NH55-32-982
$1046.87 MSRP: $1430.44
You Save: $383.57 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- MX-5 Miata | 2011-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Steering Wheel Part Number: EG21-32-982
$1164.05 MSRP: $1590.56
You Save: $426.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
- Replaces: NE51-32-982
Fits the following Mazda Models:
- MX-5 Miata | 2008-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Steering Wheel Part Number: TC86-32-980-07
$1314.82 MSRP: $1796.56
You Save: $481.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- Millenia | 2001-2002 | Base, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Steering Wheel Part Number: TD17-32-980-02
$1312.95 MSRP: $1794.01
You Save: $481.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- CX-9 | 2007-2009 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Steering Wheel Part Number: TD11-32-980A-02
$1430.36 MSRP: $1954.44
You Save: $524.08 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- CX-9 | 2007-2009 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Steering Wheel Part Number: N066-32-980
$1447.97 MSRP: $1978.50
You Save: $530.53 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- Miata | 2001-2002 | Base, LS, SE | 4 Cyl 1.8 L GAS
View related parts
Mazda Steering Wheel Part Number: FE97-32-980
$1714.06 MSRP: $2342.09
You Save: $628.03 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- RX-8 | 2006-2008 | 40th Anniversary Edition, Base, Grand Touring, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Steering Wheel Part Number: F155-32-980E-15
$1743.29 MSRP: $2382.03
You Save: $638.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
- Replaces: F155-32-980A-15, F155-32-980D-15
Fits the following Mazda Models:
- RX-8 | 2004-2008 | 40th Anniversary Edition, Base, Grand Touring, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Steering Wheel Part Number: GEG1-32-982A
$131.40 MSRP: $175.24
You Save: $43.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- 6 | 2011-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Steering Wheel Part Number: N243-32-982-02
$142.85 MSRP: $190.50
You Save: $47.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boss, Steering Wheel
Fits the following Mazda Models:
- MX-5 Miata | 2016-2020 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Steering Wheel Part Number: NA01-32-980D
Product Specifications
- Other Name: Boss, Steering Wheel
- Replaces: NA01-32-980C
Fits the following Mazda Models:
- Miata | 1990-1997 | Base, LE, M Edition, SE, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS

| Page 1 of 7 |Next >

1-20 of 133 Results

Mazda Steering Wheel

The Mazda Steering Wheel allows drivers to have quick and precise control of direction, making any turn feel confident and smooth. Mazda earned its reputation for a history of inventive engines as well as lightweight thinking and the lively Kodo design language that defines each body line. From the early rotary-powered icons to modern Skyactiv platforms, Mazda places equal emphasis on fun and efficiency, and i-Activsense safety features work quietly to keep families protected while i-Activ AWD tackles slippery roads without fuss. Developing mild hybrids and electric options, Mazda demonstrates its ability to respect the joy of driving while meeting the goals of the future for energy, keeping the brand fresh for new generations to come. Complementing that spirit, the Steering Wheel is the main interface between driver will and moving tires, converting hand movement into precise changes of heading through elegant sets of rack and pinions that can be aided by hydraulic or electric power. Its balanced rim thickness fits hands comfortably, its durable core is resistant to vibration, and the familiar badge in the center reminds everyone of Mazda pride with every look. Because feedback is consistent at town speeds as well as winding backroads, the Steering Wheel supports the playful handling that makes the entire lineup fun, allowing compact hatchbacks and spacious SUVs alike to react instantly, stay stable in an emergency, and provide the fun feel that drivers around the world have come to love.

You'll get great performance and real durability when you pick genuine OEM Steering Wheel. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Steering Wheel Parts and Q&A

Steering Wheel
B37F-32-982
Q: How to remove and install the airbag module and steering wheel on Mazda 3?
A:
In order to pull out the airbag module, I would first switch the ignition key to Off, and also disconnect the negative battery cable. The second step will be to straighten the steering wheel to ensure the straightness of the wheels and to remove the key. Removing the hole covers on both sides of the steering wheel and unscrewing the airbag module mounting fasteners, grip the module slightly out of the wheel on one side, and then repeat on the other side. Disconnect electrical connectors by lifting connector locks and then place airbag module in a safe place. Make matchmarks on the steering shaft and the wheel, then remove the steering wheel mounting nut and rock the steering wheel to loosen up and make sure to feed the wires and connectors as you do the same. Tape the clockspring to ensure it does not turn around because turning the steering shaft during the removal of the wheel and airbag would end up damage. In case the clockspring has to be removed, remove the steering column covers then turn the inner rotor clockwise until it stops then turn it anti-clockwise 2-3/4 turns, matching the marks on the clockspring and outer housing. Installation can be done by passing the wiring and airbag connection through the wheel, re-inserting the steering wheel back onto the shaft matching the match marks and connecting the mounting nut to the desired torque. Lastly, attach the connectors to the airbag module with the safety tabs up, and as per the color-coding of the airbag connectors, connect the module down to the wheel and until the connecting clips fit.
Steering Wheel
GS3L-32-982A
Q: How to remove and install the airbag module and steering wheel on Mazda 6?
A:
The airbag module should be removed and to do so firstly turn off the ignition key and then disconnect the negative battery cable and wait at least two minutes before removing it. The second step is to turn the steering wheel to face the wheels directly forward and take out the key. With a small screwdriver, loosen the plastic covers of the airbag module mounting bolts on the steering wheel on either side then remove the bolts and carefully pull the airbag module off the steering wheel on either side. Tear the connector locks and pull out the electrical connectors of the airbag module, and then remove the airbag and put it in a safe and isolated location. Mark match positions on the steering shaft and wheel and unscrew steering wheel mounting nut and shake wheel until it breaks free of the steering shaft, guiding the wires and connector attachments out of the wheel as you do so. Tape the clock spring to help it not rotate with care not to rotate the steering shaft with the wheel and airbag off or it will break the clock spring. The clock spring: remove the steering column covers, disconnect, and screw remove the steering column. To install, should the clock spring have been removed install it now and center by turning the inner rotor counter clockwise until resistance is experienced then turn counter clockwise about 2 to 2-1/4 turns and place the electrical connector where the 12 o clock mark is. Installation of the wheel requires wiring and air bag connectors to be run through the wheel, the steering wheel on the steering shaft to fit the match marks and the steering wheel nut to be attached to the required torque. The rest of the installation procedures are simply the reverse process of the steps to be performed to remove them, the connectors must be installed properly on the airbag module by positioning with the safety tabs facing up, matching the color-coding of the airbag connector and ensure that the airbag module is firmly clamped down towards the wheel until the retaining clips lock.