How to remove and install a tie rod end on Mazda 3?

Removal of the tie-rod end To remove the tie-rod end, loosen lug nut of the rear wheel first and then apply the parking brake and raise the front of the vehicle and securely on jackstands before removing the front wheel and splash shields. Then put the tie-rod in the locking pliers or wrench and loosen the jam nut sufficiently to place the mark of the tie-rod end upon the threads. Take out the cotter pin and remove the nut on the tie-rod end stud without taking it out. Disconnect the tie-rod end to the steering knuckle arm with a puller and then the nut and detach the tie-rod end. Unscrew the tie-rod end off of the tie-rod. To install, thread tie-rod end onto the marked position and fit the stud into the steering knuckle arm and tighten the jam nut. Install the nut on the stud and tighten it to the required torque and then install a new cotter pin. Lastly, put in the wheel and lug nut, jack down the car and screw the lug nut to the required torque and ensure that the alignment is checked and also made fine.

How to remove and install a tie rod end on Mazda 6?

Removing the tie-rod end: To start with loosen the lug nuts of the front wheel, engage the parking brake, lift the front end of the car and ensure that it stands firmly on jackstands then remove the front wheel. The next step is to get the tie-rod and use locking pliers or a wrench to loosen the jam nut to the point that the location of the tie-rod end relative to the threads can be marked. Loose the cotter pin, but do not take out the nut on the tie-rod end stud. Disconnect the tie-rod end to the steering knuckle arm with a puller, remove the nut and remove the tie-rod end. Loosen the end of the tie-rod. To install, screw the tie-rod end onto the matching place and place the stud into the steering arm of the knuckle and screw the jam nut. Install the nut on the stud and screw it to the desired torque and then replace a cotter pin. Lastly, place the wheel and lug nuts in place, twist the vehicle and attach lug nuts to the required torque ensuring that the alignment is fixed and corrected should there be a necessity of so.

Genuine Mazda Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

113 Tie Rod Ends found

View related parts
Mazda Inner Tie Rod Part Number: VA40-32-240
$24.53 MSRP: $32.71
You Save: $8.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Inner Tie Rod
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Inner Tie Rod Part Number: DFR5-32-240
$25.90 MSRP: $34.54
You Save: $8.64 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Inner Tie Rod
Fits the following Mazda Models:
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Outer Tie Rod Part Number: DFR5-32-280
$25.90 MSRP: $34.54
You Save: $8.64 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer; Outer Tie Rod
- Position: Outer Passenger Side
Fits the following Mazda Models:
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Outer Tie Rod Part Number: BDTS-32-280
$29.21 MSRP: $38.96
You Save: $9.75 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer; Outer Tie Rod
- Position: Right
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: BDTS-32-290
$29.48 MSRP: $39.30
You Save: $9.82 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Left), Ball-Outer; Outer Tie Rod
- Position: Left
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: GS3L-32-280
$33.59 MSRP: $44.79
You Save: $11.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer
- Position: Right
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Inner Tie Rod Part Number: BDTS-32-240
$36.58 MSRP: $48.77
You Save: $12.19 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Inner Tie Rod
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: VA40-32-280
$36.79 MSRP: $49.06
You Save: $12.27 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Outer Tie Rod
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: BCKA-32-280
$37.24 MSRP: $49.66
You Save: $12.42 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer; Outer Tie Rod
- Position: Right
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Inner Tie Rod Part Number: K123-32-240
$37.61 MSRP: $50.17
You Save: $12.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Joint Set; Inner Tie Rod
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: KD31-32-280
$41.01 MSRP: $54.69
You Save: $13.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer
- Position: Outer
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: K123-32-280
$41.35 MSRP: $55.15
You Save: $13.80 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Outer Tie Rod
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: D10E-32-280
$41.56 MSRP: $55.42
You Save: $13.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer
- Position: Outer
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Inner Tie Rod Part Number: N243-32-240
$42.03 MSRP: $56.04
You Save: $14.01 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball
- Position: Inner
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Inner Tie Rod Part Number: DGH9-32-240
$44.18 MSRP: $58.91
You Save: $14.73 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Inner Tie Rod
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Outer Tie Rod Part Number: TD11-32-280A
$44.86 MSRP: $59.83
You Save: $14.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Right), Ball-Outer
- Position: Right
- Replaces: TD11-32-280
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Inner Tie Rod Part Number: KD31-32-240B
$45.11 MSRP: $60.16
You Save: $15.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball; Inner Tie Rod
- Replaces: KD31-32-240A, KD31-32-240
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Inner Tie Rod Part Number: GS3L-32-24X
$45.56 MSRP: $60.76
You Save: $15.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Set, Ball-Steering Gear
- Position: Inner
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Outer Tie Rod Part Number: TD11-32-290A
$45.89 MSRP: $61.20
You Save: $15.31 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint(Left), Ball-Outer
- Position: Left
- Replaces: TD11-32-290
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Outer Tie Rod Part Number: EC01-32-280A
$45.15 MSRP: $60.21
You Save: $15.06 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Ball
- Position: Outer
- Replaces: EC01-32-280, EF91-32-280
Fits the following Mazda Models:
- Tribute | 2001-2006 | DX, ES, i, LX, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 6 |Next >

1-20 of 113 Results

Mazda Tie Rod End

Mazda Tie Rod End turns the steering input into precise wheel movement for every Mazda vehicle to respond quickly and control smoothly. Mazda has won worldwide respect since 1931 for cars that combine spiritedness with economy from innovations such as rotary power, Skyactiv engines, and the sleek Kodo design language that makes each shape appear to be poised to spring forward. The company pairs these looks with some smart i-Activsense safety aids for expansion into electric drive and mild hybrids and tests i-Activ AWD in challenging terrain, all to ensure that Mazda is keeping its fun-to-drive reputation alive for drivers of all ages. Within this dynamic lineup, the Tie Rod End is a small but crucial steering joint located between the steering rack and steering knuckle. Its inner part is threaded to the rack, its outer part is connected to the knuckle, and the two transfer the force without delay, ensuring good wheel alignment and smooth cornering. Because the Tie Rod End must remain tight and articulate freely, durable materials and protective boots protect it from the road grit and moisture that can ruin the crisp steering feel that is a signature of every Mazda. Regular attention to this component keeps play from causing uneven tire wear, allowing owners to experience confident handling that is synonymous with Mazda performance.

You'll get great performance and real durability when you pick genuine OEM Tie Rod End. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Tie Rod End Parts and Q&A

Outer Tie Rod
BP4L-32-290
Q: How to remove and install a tie rod end on Mazda 3?
A:
Removal of the tie-rod end To remove the tie-rod end, loosen lug nut of the rear wheel first and then apply the parking brake and raise the front of the vehicle and securely on jackstands before removing the front wheel and splash shields. Then put the tie-rod in the locking pliers or wrench and loosen the jam nut sufficiently to place the mark of the tie-rod end upon the threads. Take out the cotter pin and remove the nut on the tie-rod end stud without taking it out. Disconnect the tie-rod end to the steering knuckle arm with a puller and then the nut and detach the tie-rod end. Unscrew the tie-rod end off of the tie-rod. To install, thread tie-rod end onto the marked position and fit the stud into the steering knuckle arm and tighten the jam nut. Install the nut on the stud and tighten it to the required torque and then install a new cotter pin. Lastly, put in the wheel and lug nut, jack down the car and screw the lug nut to the required torque and ensure that the alignment is checked and also made fine.
Outer Tie Rod
G26A-32-290
Q: How to remove and install a tie rod end on Mazda 6?
A:
Removing the tie-rod end: To start with loosen the lug nuts of the front wheel, engage the parking brake, lift the front end of the car and ensure that it stands firmly on jackstands then remove the front wheel. The next step is to get the tie-rod and use locking pliers or a wrench to loosen the jam nut to the point that the location of the tie-rod end relative to the threads can be marked. Loose the cotter pin, but do not take out the nut on the tie-rod end stud. Disconnect the tie-rod end to the steering knuckle arm with a puller, remove the nut and remove the tie-rod end. Loosen the end of the tie-rod. To install, screw the tie-rod end onto the matching place and place the stud into the steering arm of the knuckle and screw the jam nut. Install the nut on the stud and screw it to the desired torque and then replace a cotter pin. Lastly, place the wheel and lug nuts in place, twist the vehicle and attach lug nuts to the required torque ensuring that the alignment is fixed and corrected should there be a necessity of so.