How to remove and install the A/C switch control assembly on Mazda 3?

Remove the battery cover and disconnect the cable from the negative battery terminal. For 2009 and earlier models, take off the driver's side scuff plate, kick panel, lower trim panel, decorative trim panel, and glove box. For 2010 and later models, remove the scuff plate, side kick panels, lower trim panels, knee bolster, glove box, center trim panel, and side center trim panel. Next, remove the radio and navigation unit if equipped, followed by the ashtray and center console. For models with automatic air conditioning, take out the heater/air conditioner control assembly retaining screws, use a small screwdriver to release the tabs on each side of the panel/control assembly, slide the unit forward, and disconnect the electrical connector. For models with manual air conditioning, remove the Passenger Junction Box, take out the heater/air conditioner control assembly cable mounting screws, disconnect the cable by depressing the tab on the airflow or air mix arm while sliding the coiled end of the cable off the arm, remove the retaining screws for the control assembly, release the retaining clips on each side of the control unit, carefully pull the control assembly forward, disconnect the electrical connectors, and remove the control unit and cables as an assembly from the instrument panel. Installation is the reverse of removal.

How to Remove and Install the A/C Switch Assembly on Mazda 6?

Disconnect the cable from the negative battery terminal. Remove the center console. Remove the shift lever knob and shift panel. Use a plastic trim tool to pry the center trim panel assembly from the instrument panel, if necessary, disconnect any electrical connectors. Caution: On some models, the center trim panel goes around the A/C Switch and down around the shifter in the center console. When prying, be sure to work all the way around the perimeter before trying to remove the panel. For 2008 and earlier models with manual A/C, depress the locking tabs on each side of the A/C Switch and pull the unit forward. Disconnect the electrical connectors at the module and the control cables. Remove the A/C Switch from the instrument panel. Installation is the reverse of removal. For automatic A/C models, remove the A/C Switch retaining screws on the back of the center trim panel. Installation is the reverse of removal. For 2009 and later models, remove the A/C Switch retaining screws and pull the unit forward. Disconnect the electrical connectors to the module. Installation is the reverse of removal.

Genuine Mazda A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

211 A/C Switches found

View related parts
Mazda Control Switch Part Number: KAYG-66-CM0
$285.34 MSRP: $380.53
You Save: $95.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Command
- Replaces: KA0G-66-CM0
Fits the following Mazda Models:
- CX-9 | 2016-2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: KN0W-61-190A
$785.75 MSRP: $1073.64
You Save: $287.89 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: KN0W-61-190
Fits the following Mazda Models:
- CX-5 | 2019-2022 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: TK80-61-325F
$534.81 MSRP: $718.98
You Save: $184.17 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Rear Heater; Heater & A/C Control
- Replaces: TK80-61-325D, TK80-61-325C
Fits the following Mazda Models:
- CX-9 | 2016-2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: NH19-61-190D
$665.45 MSRP: $909.27
You Save: $243.82 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: NH19-61-190C
Fits the following Mazda Models:
- MX-5 Miata | 2009-2015 | 25th Anniversary Edition, Club, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Control Switch Part Number: GMJ6-66-CM0B
$566.06 MSRP: $760.98
You Save: $194.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Command; Upper Panel
- Replaces: GMJ6-66-CM0A
Fits the following Mazda Models:
- 3 | 2017-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: KN1B-61-190A
$720.35 MSRP: $984.27
You Save: $263.92 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: KN1B-61-190
Fits the following Mazda Models:
- CX-5 | 2019-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Dash Control Unit Part Number: TM52-61-190
$1023.89 MSRP: $1399.03
You Save: $375.14 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater
Fits the following Mazda Models:
- CX-9 | 2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: TK80-61-190F
$1048.44 MSRP: $1432.59
You Save: $384.15 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: TK80-61-190D, TK80-61-190E, TK80-61-190B, TK80-61-190A, TK80-61-190, TK80-61-190C
Fits the following Mazda Models:
- CX-9 | 2016-2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: GJR9-61-190B
$532.48 MSRP: $715.85
You Save: $183.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: GJR9-61-190, GJR9-61-190A
Fits the following Mazda Models:
- 6 | 2014-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: NA9C-61-190F
$579.03 MSRP: $778.42
You Save: $199.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater
Fits the following Mazda Models:
- MX-5 Miata | 2016-2021 | Grand Touring, RF 100th Anniversary Special Edition, RF Grand Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Heater Control Part Number: BGEC-61-190
$344.64 MSRP: $459.62
You Save: $114.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: BFWA-61-190, BDGJ-61-190, BDGJ-61-190A
Fits the following Mazda Models:
- 3 | 2019-2023 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Fan Switch Part Number: S38A-61-C50
$44.09 MSRP: $58.79
You Save: $14.70 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Fan-Heater Control; Blower Motor Switch
Fits the following Mazda Models:
- Miata | 1999-2000 | 10th Anniversary, Base, LS, SE | 4 Cyl 1.8 L GAS
- Protege | 1999-2001 | DX, ES, LX, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Mazda Control Switch Part Number: DB5J-66-CM0B
$349.40 MSRP: $465.95
You Save: $116.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Command
- Replaces: DB5J-66-CM0A, DB5J-66-CM0
Fits the following Mazda Models:
- CX-3 | 2016-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Heater Control Part Number: NH32-61-190B
$120.37 MSRP: $922.09
You Save: $801.72 (87%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: NH32-61-190A
Fits the following Mazda Models:
- MX-5 Miata | 2009-2015 | 25th Anniversary Edition, Club, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Heater Control Part Number: BN8L-61-190D
$615.97 MSRP: $841.65
You Save: $225.68 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: BN8L-61-190B, BN8L-61-190A
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23 | 4 Cyl 2.3 L GAS
View related parts
Mazda Heater Control Part Number: TA01-61-190
$621.90 MSRP: $849.76
You Save: $227.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
Fits the following Mazda Models:
- Millenia | 1995-2000 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Heater Control Part Number: EG22-61-190N
$640.46 MSRP: $875.13
You Save: $234.67 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
Fits the following Mazda Models:
- CX-7 | 2009 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda CONTROL,HEATER Part Number: KMV6-61-190B
$654.82 MSRP: $894.75
You Save: $239.93 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Heater Control
- Replaced by: KMV6-61-190C
Fits the following Mazda Models:
- CX-90 | 2024-2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mazda Heater Control Part Number: GRG1-61-190B
$676.94 MSRP: $924.97
You Save: $248.03 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater; Dash Control Unit
- Replaces: GRG1-61-190A
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Control, Heater Part Number: KMV7-61-190A
$683.74 MSRP: $934.25
You Save: $250.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CONTROL,HEATER; Heater Control
- Replaced by: KMV7-61-190B
Fits the following Mazda Models:
- CX-70 | 2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)

| Page 1 of 11 |Next >

1-20 of 211 Results

Mazda A/C Switch

Mazda A/C Switch allows drivers to have instant control of the cabin temperature by connecting or cutting the power to the compressor and blower, making every ride more comfortable. Mazda began in 1931 and built a reputation for lively rotary engines, and today their Skyactiv motors and transmissions keep fuel use low while preserving punchy acceleration. Mazda swaddles each model in sleek Kodo styling, with i-Activsense aids such as lane keeping and radar cruise so that trips are safer and less tiring. Mazda is also testing i-Activ AWD on rough roads and experimenting with electric and mild hybrid setups, demonstrating that efficiency does not have to be a dull way to drive. While those advances define the entire lineup, the A/C Switch is a simple hero lurking in the dash. Every A/C Switch is an electrical gate that allows the climate control brain to energize the compressor only when necessary and prevents wasteful cycling, which can help the Skyactiv powertrain save fuel. A quick press orders chilled or warmed air immediately, and the newer versions that are built into the panel communicate with digital sensors to provide for more seamless blower speed changes, avoiding the sudden blasts of cold or heat. Because of its immediate responsiveness and lack of constant compressor load, the switch helps with the spirited nature of a Mazda driver, providing comfort without compromising efficiency or driving joy.

You'll get great performance and real durability when you pick genuine OEM A/C Switch. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda A/C Switch Parts and Q&A

Heater Control
BBM5-61-190K
Q:
How to remove and install the A/C switch control assembly on Mazda 3?
A:
Remove the battery cover and disconnect the cable from the negative battery terminal. For 2009 and earlier models, take off the driver's side scuff plate, kick panel, lower trim panel, decorative trim panel, and glove box. For 2010 and later models, remove the scuff plate, side kick panels, lower trim panels, knee bolster, glove box, center trim panel, and side center trim panel. Next, remove the radio and navigation unit if equipped, followed by the ashtray and center console. For models with automatic air conditioning, take out the heater/air conditioner control assembly retaining screws, use a small screwdriver to release the tabs on each side of the panel/control assembly, slide the unit forward, and disconnect the electrical connector. For models with manual air conditioning, remove the Passenger Junction Box, take out the heater/air conditioner control assembly cable mounting screws, disconnect the cable by depressing the tab on the airflow or air mix arm while sliding the coiled end of the cable off the arm, remove the retaining screws for the control assembly, release the retaining clips on each side of the control unit, carefully pull the control assembly forward, disconnect the electrical connectors, and remove the control unit and cables as an assembly from the instrument panel. Installation is the reverse of removal.
Heater Control
GS3M-61-190C
Q:
How to Remove and Install the A/C Switch Assembly on Mazda 6?
A:
Disconnect the cable from the negative battery terminal. Remove the center console. Remove the shift lever knob and shift panel. Use a plastic trim tool to pry the center trim panel assembly from the instrument panel, if necessary, disconnect any electrical connectors. Caution: On some models, the center trim panel goes around the A/C Switch and down around the shifter in the center console. When prying, be sure to work all the way around the perimeter before trying to remove the panel. For 2008 and earlier models with manual A/C, depress the locking tabs on each side of the A/C Switch and pull the unit forward. Disconnect the electrical connectors at the module and the control cables. Remove the A/C Switch from the instrument panel. Installation is the reverse of removal. For automatic A/C models, remove the A/C Switch retaining screws on the back of the center trim panel. Installation is the reverse of removal. For 2009 and later models, remove the A/C Switch retaining screws and pull the unit forward. Disconnect the electrical connectors to the module. Installation is the reverse of removal.