How to remove and install the rear sway bar and rear sway bar bushing on Mazda 3?

Removal of the rear stabilizer bar requires first loosening of the rear wheel lug nuts, elevating the rear of the vehicle and placing it firmly on jackstands ensuring that the front wheels are blocked so that it does not roll. The next step is to loosen the links of the stabilizer bar to the bar and lower suspension arms by using an Allen wrench to hold the ballstud in case the latter turns during the process. The stabilizer bar bushing clamps are unbolted and the stabilizer bar is directed out of between the subframe and the EVAP shield and the EVAP shield mounting bolts are removed so that the stabilizer bar is able to move. When the stabilizer bar is disengaged, remove the retainer bushings and examine them to make sure they are not cracked, worn, or otherwise worn out and replace them if needed. Wipe a stiff wire brush to clean the bushing part of the stabilizer bar. To install, apply a lot of vegetable oil to the inside and outside of the new bushing to make the reassembly easier, the slits of the bushings should also point towards the front of the car. At last, assemble the parts in the order in which they were removed and screw the connections to the required torque values.

How to remove and install the Sway Bar and Sway Bar Bushing components of a vehicle's front subframe on Mazda 6?

The first step to take in order to remove the components is to loosen front wheel lug nuts, lift the front of the vehicle and sustain it on jackstands with the application of parking brake and blocking of rear wheels. The second step is to unscrew the front wheels and take off the stabilizer bar links with the bar with the help of an Allen wrench to hold the stud in case the ballstud rotates around the nut. Unhook the steering shaft and steering gear, but make sure not to turn the steering wheel in order to prevent rupture of the airbag clock spring. Next, loosen the tie-rod ends inserting the steering knuckles and take away the steering gear bolts. Separate the exhaust pipe/s off the exhaust manifold/s and hold the back of the subframe up with a floor jack. Relax the front sub frame mounting fasteners, strip the back sub frame fasteners and use the jack to lower the back of the sub frame. Unscrew the stabilizer bar bushing clamps and direct the stabilizer bar out of the subframe body. When the stabilizer bar is not connected, drop off the retainer bushings and examine them to see if they are cracked or worn and change them as needed. Wipe the stabilizer bar bushing area using a stiff wire brush to clean it off. During installation, grease the interior and exterior of the new bushing using vegetable oil in order to help in reassembling the bushing with the slits of the bushings oriented at the rear of the car. Lastly, removal is the opposite of installation and fasteners are supposed to be tightened at the required torque levels.

Genuine Mazda Sway Bar

Sway Bar Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

129 Sway Bars found

View related parts
Mazda Stabilizer Bar Part Number: BJS7-34-151A
$71.39 MSRP: $95.19
You Save: $23.80 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front; Stabilizer Bar
- Position: Front
- Replaces: BJS7-34-151
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: NE51-28-151A
$80.84 MSRP: $107.80
You Save: $26.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: NE51-28-151
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: NF53-28-151C
$84.09 MSRP: $112.15
You Save: $28.06 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: NF53-28-151B
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: BJS7-28-151
$84.53 MSRP: $112.72
You Save: $28.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: BP4K-28-151C
$88.08 MSRP: $117.45
You Save: $29.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: BP4K-28-151B
Fits the following Mazda Models:
- 3 | 2004-2006 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Stabilizer Bar Part Number: D09V-34-151
$100.06 MSRP: $133.44
You Save: $33.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: DF71-34-151A
$101.23 MSRP: $134.99
You Save: $33.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: DF71-34-151
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: EG21-28-151
$93.94 MSRP: $125.28
You Save: $31.34 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: B45A-34-151
$101.89 MSRP: $135.88
You Save: $33.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KB7W-34-151A
$102.73 MSRP: $136.99
You Save: $34.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front; Stabilizer Bar
- Position: Front
- Replaces: KB7W-34-151
Fits the following Mazda Models:
- CX-5 | 2020-2021, 2017-2018 | Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: N243-28-15X
$104.11 MSRP: $138.84
You Save: $34.73 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Stabilizer Bar Part Number: GHP9-28-151
$105.03 MSRP: $140.06
You Save: $35.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 6 | 2014 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KD31-28-151
$105.69 MSRP: $140.95
You Save: $35.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: KBH5-28-151
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2021 | Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2021 | Carbon Edition, Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Stabilizer Bar Part Number: BBM2-28-151A
$107.89 MSRP: $143.87
You Save: $35.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
- Replaces: BBM2-28-151
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: TD11-28-151
$102.20 MSRP: $136.29
You Save: $34.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Stabilizer Bar Part Number: B45A-28-151
$108.53 MSRP: $144.73
You Save: $36.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2019 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: CG16-28-151
$108.79 MSRP: $145.07
You Save: $36.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: GEL6-34-151
$101.35 MSRP: $135.17
You Save: $33.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
- Replaces: GS4H-34-151
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
View related parts
Mazda Stabilizer Bar Part Number: KD35-34-151
$109.50 MSRP: $146.03
You Save: $36.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Front
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Stabilizer Bar Part Number: F197-28-151
$109.80 MSRP: $146.43
You Save: $36.63 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer, Rear
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS

| Page 1 of 7 |Next >

1-20 of 129 Results

Mazda Sway Bar

Mazda Sway Bar delivers sharper cornering by reducing body roll, giving every driver a sense of balance and control that turns daily travel into something sporty yet predictable. Mazda has long mixed spirited performance with real-world efficiency, from its famous rotary heritage to modern Skyactiv engines that sip fuel while still singing at high revs, and its Kodo design wraps each vehicle in flowing lines that hint at motion even while parked. The brand's i-Activsense features keep eyes on the road with smart assists, and available electric and mild-hybrid systems show Mazda is looking forward without losing the fun-to-drive soul fans love. In this broader quest for harmony between man and machine, the Mazda Sway Bar plays a vital chassis role. Acting like a strong torsion spring between left and right wheels, the Sway Bar counters lateral weight transfer, so the tires stay flatter on the asphalt and steering feels more direct. Because it is engineered for the whole lineup, owners can expect consistent handling traits whether piloting a compact hatch or a roomy SUV, and upgrades from hollow to solid bars allow enthusiasts to fine-tune ride versus rigidity while still enjoying factory reliability. With the commitment to balanced dynamics, the Mazda suspension enhanced by its stabilizer keeps every curve engaging and every straightaway calm.

You'll get great performance and real durability when you pick genuine OEM Sway Bar. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Sway Bar Parts and Q&A

Stabilizer Bar
BBM2-28-151A
Q: How to remove and install the rear sway bar and rear sway bar bushing on Mazda 3?
A:
Removal of the rear stabilizer bar requires first loosening of the rear wheel lug nuts, elevating the rear of the vehicle and placing it firmly on jackstands ensuring that the front wheels are blocked so that it does not roll. The next step is to loosen the links of the stabilizer bar to the bar and lower suspension arms by using an Allen wrench to hold the ballstud in case the latter turns during the process. The stabilizer bar bushing clamps are unbolted and the stabilizer bar is directed out of between the subframe and the EVAP shield and the EVAP shield mounting bolts are removed so that the stabilizer bar is able to move. When the stabilizer bar is disengaged, remove the retainer bushings and examine them to make sure they are not cracked, worn, or otherwise worn out and replace them if needed. Wipe a stiff wire brush to clean the bushing part of the stabilizer bar. To install, apply a lot of vegetable oil to the inside and outside of the new bushing to make the reassembly easier, the slits of the bushings should also point towards the front of the car. At last, assemble the parts in the order in which they were removed and screw the connections to the required torque values.
Stabilizer Bar
GK2C-34-151B
Q: How to remove and install the Sway Bar and Sway Bar Bushing components of a vehicle's front subframe on Mazda 6?
A:
The first step to take in order to remove the components is to loosen front wheel lug nuts, lift the front of the vehicle and sustain it on jackstands with the application of parking brake and blocking of rear wheels. The second step is to unscrew the front wheels and take off the stabilizer bar links with the bar with the help of an Allen wrench to hold the stud in case the ballstud rotates around the nut. Unhook the steering shaft and steering gear, but make sure not to turn the steering wheel in order to prevent rupture of the airbag clock spring. Next, loosen the tie-rod ends inserting the steering knuckles and take away the steering gear bolts. Separate the exhaust pipe/s off the exhaust manifold/s and hold the back of the subframe up with a floor jack. Relax the front sub frame mounting fasteners, strip the back sub frame fasteners and use the jack to lower the back of the sub frame. Unscrew the stabilizer bar bushing clamps and direct the stabilizer bar out of the subframe body. When the stabilizer bar is not connected, drop off the retainer bushings and examine them to see if they are cracked or worn and change them as needed. Wipe the stabilizer bar bushing area using a stiff wire brush to clean it off. During installation, grease the interior and exterior of the new bushing using vegetable oil in order to help in reassembling the bushing with the slits of the bushings oriented at the rear of the car. Lastly, removal is the opposite of installation and fasteners are supposed to be tightened at the required torque levels.