How does the oil filter impact the importance of frequent oil changes for preventive maintenance on Mazda 3?

Preventive maintenance is essential and this is achieved by frequent replacement of oil as old engine oil is dilute and contaminated thus causing early wear of the engine. Preparations Before positioning the tractor, you require some equipment such as a shallow drain pan, rubber gloves to help avoid burning your hands with oil, a breaker bar to fit the drain plug, a socket to fit the drain plug, and a filter wrench to fit the type of oil filter. It is also good to have rags, or newspapers to spill on. The oil drain plug and filter are more easily reached in case the vehicle is hoisted, ramped up or resting on jackstands. In the event of not being familiar with the vehicle, find the oil drain plug and filter taking care of hot exhaust parts. Turn on the engine to heat the oil to be drained easily and then leave the engine in a level parking place and take off the oil filler cap. Get the vehicle on jackstands and take off the bottom engine cover. The drain pan must be placed beneath the plug of the drain and the plug must be removed with the proper tool with the wear gloves to prevent burns of the hot oil. When the oil drains, check it with metal particles and remove the drain plug and clean the drain area and replace and screw it back. In the case of a cartridge type filter, place the drain pan under the cover of the oil filter, unscrew the cover and the drain plug and then the oil will drain off and then the filter and the cover can be removed. Make sure to remove the old O-ring and match the old and new filter with each other and always lubricate the new O-ring using clean engine oil before fitting. In the case of canister-type filters, it is necessary to place the drain pan, loosen the filter and clean the mounting surface, leaving no residual old gasket. Installation of new filter is done by hand with tightening. Once all the tools are removed, the vehicle is lowered; add new oil using a funnel via the filler cap, scan the level on the dipstick and make sure that it is within the acceptable range. Turn on the engine and test the leakage, tightening the leaking parts, where needed. Check the level of oil after a couple of minutes and top up oil where necessary keeping watch of the leakages and appropriate oil levels during the first journeys after changing the oil. Discarding the old oil in an unacceptable manner, but ensuring that it is recycled in a suitable facility.

How to remove and install an oil filter on Mazda RX-7?

The engine has the oil filter on the top left-hand side which is a throwing-away/non-cleaning, and reuseable filter. To loosen the filter, place an oil filter wrench in the filter with the handle as the top to avoid collapsing since some filters may not be easy to loosen, so a metal bar can be inserted through the filter towards the top resembling a T handle or long screw driver. At the time of changing a new filter cartridge, apply a thin layer of clean engine oil to the oil seal on the bottom of the filter and clean up the surface where the filter fits on the pedestal base. Install the new filter on the pedestal and fix it only manually, without using a wrench. Then pour engine oil into the sump where necessary, start the engine and look around the bottom of the filter, should there be any leakage, tighten the filter a little further, only with the hand pressure.

Genuine Mazda Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Oil Filters found

View related parts
Mazda Oil Filter Part Number: YF09-14-302A
$11.76 MSRP: $15.69
You Save: $3.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crtrdge, Oil Filter Cp=12
- Replaces: CA02-14-302, CA02-14-302A, YF09-14-302, YFY0-14-302, ZZM1-23-802A, ZZM1-23-802
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
- B2300 | 2001-2009 | Base, SE, SX | 4 Cyl 2.3 L GAS
- B2500 | 1998-2001 | SE, SX, Troy Lee | 4 Cyl 2.5 L GAS
- B3000 | 1998-2007, 1994-1996 | Base, DS, SE, SX, Troy Lee | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- Tribute | 2001-2004 | DX | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Filter Part Number: LF05-14-302B
$8.94 MSRP: $11.92
You Save: $2.98 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil/No Diesel Apl; Filter
- Replaces: LFY1-14-302
Fits the following Mazda Models:
- 3 | 2004-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015, 2009-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2009-2013, 2006-2007 | i | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- B2300 | 2007-2009 | Base | 4 Cyl 2.3 L GAS
- CX-7 | 2010-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
- Tribute | 2008-2011, 2005-2006 | i | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Oil Filter Part Number: SH01-14-302A
$7.45 MSRP: $9.94
You Save: $2.49 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil/Ref Gepc; Oil Filter
- Replaces: SH01-14-302, SHY1-14-302
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Element Part Number: L321-14-302A-9U
$9.34 MSRP: $12.45
You Save: $3.11 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Filter Cp=12
- Replaces: LF01-14-302, L321-14-302-9A, ZZCA-23-802, L321-14-302-9U, L321-14-302
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23 | 4 Cyl 2.3 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
- 6 | 2003-2008 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2011 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
- Tribute | 2008-2010 | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View More
View related parts
Mazda Oil Filter Part Number: AJTM-14-302
$10.16 MSRP: $13.55
You Save: $3.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil Cp=12
- Replaces: AJ57-14-302, AJ04-14-302B, AJY0-14-302, GY01-14-302B
Fits the following Mazda Models:
- 6 | 2003-2008 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- B2300 | 2001-2003 | Base, SE, SX | 4 Cyl 2.3 L GAS
- B4000 | 2001-2009 | Base, DS, SE | 6 Cyl 4.0 L GAS
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Tribute | 2008, 2001-2006 | DX, ES, LX, S | 6 Cyl 3.0 L GAS
View More
View related parts
Mazda Oil Filter Part Number: B6Y1-14-302A
$8.90 MSRP: $11.87
You Save: $2.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil
- Replaces: B6Y1-14-302A-CA, B631-14-302, B631-14-302A, B6Y1-14-302-9A, B6Y1-14-302, FE3R-14-302, N350-14-302
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
- 323 | 1986-1994 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
- 626 | 1996-2002, 1987-1990 | DX, ES, GT, LX, Turbo, Turbo 4WS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
- GLC | 1984-1985 | Base, DX, LX | 4 Cyl 1.5 L GAS
- MX-3 | 1992-1995 | Base | 4 Cyl 1.6 L GAS
- MX-6 | 1996-1997, 1988-1990 | Base, DX, GT, GT 4WS, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
- Miata | 1999-2005, 1990-1997 | 10th Anniversary, Base, LE, LS, M Edition, Mazdaspeed, SE, Shinsen, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Protege | 1990-2003 | 4WD, Base, DX, ES, LX, Mazdaspeed, MP3, SE | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
- RX-7 | 1993-1995, 1984-1991 | 10th Anniversary, Base, Base 2+2, Convertible, GS, GSL, GSL-SE, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, R1, R2, S, SE, SE 2+2, Sport, Touring, Turbo | 2 Cyl 1.1 L GAS, 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Oil Filter Part Number: L321-14-300A-9U
$22.66 MSRP: $30.22
You Save: $7.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Assembly, Oil Cover & Filter; Filter Assembly
- Replaces: L321-14-300, L321-14-300-9U, L323-14-300, L321-14-300A
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23 | 4 Cyl 2.3 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
- 6 | 2003-2008 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2009 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View More
View related parts
Mazda Oil Filter Part Number: G6Y0-14-302-P1
$7.35 MSRP: $9.79
You Save: $2.44 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil Cp=12
- Replaces: G6Y0-14-302A, F2Y0-14-302A, JEY0-14-302-9A, G6Y0-14-302
Fits the following Mazda Models:
- 626 | 1984-2002 | DX, ES, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS
- 929 | 1988-1995 | Base, S | 6 Cyl 3.0 L GAS
- B2000 | 1986-1987, 1984 | Base, LX, SE-5, Sundowner Base, Sundowner SE-5, Sundowner Sport | 4 Cyl 2.0 L GAS
- B2200 | 1987-1993, 1984 | Base, LE-5, LX, SE-5, Sundowner Base | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS
- B2600 | 1987-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.6 L GAS
- MPV | 1989-1998 | Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- MX-3 | 1992-1995 | Base, GS, SE | 6 Cyl 1.8 L GAS
- MX-6 | 1988-1997 | Base, DX, GT, GT 4WS, LE, LS, LX, M Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS
- Millenia | 1995-2002 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View More
View related parts
Mazda Oil Filter Part Number: PE01-14-302A-MV
$8.45 MSRP: $11.27
You Save: $2.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Filter, (VPM)
- Replaced by: PE01-14-302B-MV
Fits the following Mazda Models:
- MX-5 Miata | 2021-2022 | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Oil Filter Part Number: PY8W-14-302-MV
$8.45 MSRP: $11.27
You Save: $2.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil Turbo (VPM); Oil Filter
- Replaced by: PY8W-14-302A-MV
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Oil Filter Part Number: N3R1-14-302
$8.29 MSRP: $11.05
You Save: $2.76 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cartridge, Oil Filter
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Oil Filter Part Number: 1WPE-14-302
$11.76 MSRP: $15.68
You Save: $3.92 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cartridge, Oil Filter
- Replaces: PE01-14-302B, PE01-14-302, PE01-14-302A
Fits the following Mazda Models:
- 3 | 2012-2024 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Mazdaspeed, Preferred, Premium, S, s Grand Touring, s Touring, Select, Select Sport, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2024 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S | 4 Cyl 2.5 L GAS
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Oil Filter Part Number: 1WPY-14-302
$11.76 MSRP: $15.68
You Save: $3.92 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: PY8W-14-302
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Filter Part Number: L3G2-14-3X2A
$9.36 MSRP: $12.48
You Save: $3.12 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil
- Replaces: L3G2-14-3X2
Fits the following Mazda Models:
- 3 | 2006-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Oil Filter Part Number: AM15-14-302
$4.33 MSRP: $5.68
You Save: $1.35 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil
Fits the following Mazda Models:
- B2600 | 1987-1988 | Base, LX, SE-5 | 4 Cyl 2.6 L GAS
View related parts
Mazda Filter Part Number: ZJ50-14-3X2
$7.06 MSRP: $9.41
You Save: $2.35 (25%)
ADD TO CART
Product Specifications
- Other Name: Filter, Oil; Oil Filter
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
- 3 | 2012-2023 | 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Oil Filter Part Number: ZZL0-14-302
$6.04 MSRP: $8.05
You Save: $2.01 (25%)
ADD TO CART
Product Specifications
- Other Name: Filter, Oil
Fits the following Mazda Models:
- B2300 | 1994-1997 | Base, SE | 4 Cyl 2.3 L GAS
- B4000 | 1994-2003 | Base, DS, LE, SE, Troy Lee | 6 Cyl 4.0 L GAS
- Navajo | 1991-1994 | DX, LX | 6 Cyl 4.0 L GAS
View More
View related parts
Mazda Oil Filter Part Number: ZZC4-23-802
Fits the following Mazda Models:
- Tribute | 2009-2011 | S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mazda Oil Filter

For good performance of the cranks, cylinders, and other parts in your car, they need clean oil. This places a Mazda oil filter in a position of great importance in the mechanics of your car. You should have a high-standard oil filter since it helps purify all impurities from your motor oil. Being responsible for looking after the engine's well-being implies that the oil filter must be changed regularly, hence becoming one of the most often replaced elements in any vehicle.

Whenever you need replacements, opt for genuine Mazda Oil Filters. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Oil Filters. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Oil Filter that keeps your car running like new.

Mazda Oil Filter Parts and Q&A

Filter
LF05-14-302B
Q: How does the oil filter impact the importance of frequent oil changes for preventive maintenance on Mazda 3?
A:
Preventive maintenance is essential and this is achieved by frequent replacement of oil as old engine oil is dilute and contaminated thus causing early wear of the engine. Preparations Before positioning the tractor, you require some equipment such as a shallow drain pan, rubber gloves to help avoid burning your hands with oil, a breaker bar to fit the drain plug, a socket to fit the drain plug, and a filter wrench to fit the type of oil filter. It is also good to have rags, or newspapers to spill on. The oil drain plug and filter are more easily reached in case the vehicle is hoisted, ramped up or resting on jackstands. In the event of not being familiar with the vehicle, find the oil drain plug and filter taking care of hot exhaust parts. Turn on the engine to heat the oil to be drained easily and then leave the engine in a level parking place and take off the oil filler cap. Get the vehicle on jackstands and take off the bottom engine cover. The drain pan must be placed beneath the plug of the drain and the plug must be removed with the proper tool with the wear gloves to prevent burns of the hot oil. When the oil drains, check it with metal particles and remove the drain plug and clean the drain area and replace and screw it back. In the case of a cartridge type filter, place the drain pan under the cover of the oil filter, unscrew the cover and the drain plug and then the oil will drain off and then the filter and the cover can be removed. Make sure to remove the old O-ring and match the old and new filter with each other and always lubricate the new O-ring using clean engine oil before fitting. In the case of canister-type filters, it is necessary to place the drain pan, loosen the filter and clean the mounting surface, leaving no residual old gasket. Installation of new filter is done by hand with tightening. Once all the tools are removed, the vehicle is lowered; add new oil using a funnel via the filler cap, scan the level on the dipstick and make sure that it is within the acceptable range. Turn on the engine and test the leakage, tightening the leaking parts, where needed. Check the level of oil after a couple of minutes and top up oil where necessary keeping watch of the leakages and appropriate oil levels during the first journeys after changing the oil. Discarding the old oil in an unacceptable manner, but ensuring that it is recycled in a suitable facility.
Oil Filter
B6Y1-14-302A
Q: How to remove and install an oil filter on Mazda RX-7?
A:
The engine has the oil filter on the top left-hand side which is a throwing-away/non-cleaning, and reuseable filter. To loosen the filter, place an oil filter wrench in the filter with the handle as the top to avoid collapsing since some filters may not be easy to loosen, so a metal bar can be inserted through the filter towards the top resembling a T handle or long screw driver. At the time of changing a new filter cartridge, apply a thin layer of clean engine oil to the oil seal on the bottom of the filter and clean up the surface where the filter fits on the pedestal base. Install the new filter on the pedestal and fix it only manually, without using a wrench. Then pour engine oil into the sump where necessary, start the engine and look around the bottom of the filter, should there be any leakage, tighten the filter a little further, only with the hand pressure.