How to replace the window motor and window regulator assembly on Mazda 6?

To replace the power window motor, first disconnect the cable from the negative battery terminal, then remove the door trim panel. Next, disconnect the electrical connector from the regulator motor and secure the window in place with tape. Remove the three regulator motor mounting screws and take out the motor, with installation being the reverse of removal. For the regulator assembly, begin by removing the door trim panel and the front door speaker, followed by the door glass. If the vehicle has power windows, remove the power window motor. Then, take off the regulator mounting nuts, insert one hand through the speaker hole to rotate the window regulator drum housing clockwise from the inside, and disconnect the tabs from the door module. Remove the window regulator through the speaker hole, install the new regulator through the same hole, and ensure the drum housing locks into the door module while preventing the cable from un-spooling. Finally, tighten the regulator mounting nuts or bolts securely, with the remainder of the installation being the reverse of removal.

How to replace the window motor and window regulator assembly on Mazda 3?

In order to change the power window motor, connect the cable to the negative battery first, remove door trim panel, and then unconnect the electrical connector to the regulator motor. Tape the window and continue removing the three regulator motor mounting screws and extract the motor. In the case of the regulator assembly, the door trim panel, the front door speaker, and the door glass should be removed. In case of the model being powered by the power window, take out the power window motor. Then dismount the regulator mounting nuts or bolts and put your hand through the speaker hole and with the thumb clockwise and inwards on the inside and loosen the tabs on the door module. To install, take out the window regulator using the speaker hole, and fit in the new regulator using the same hole, make sure the drum housing fits into the door module, and the cable does not unspool. Lastly, install the regulator with the mounting nuts or bolts, which should be tightened securely, and install the rest of the regulator in reverse order.

Genuine Mazda Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

242 Window Regulators found

View related parts
Mazda Window Regulator Part Number: DN4E-59-590A
$127.41 MSRP: $169.92
You Save: $42.51 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm/Base(Left), Window; Window Regulator
- Position: Left
- Replaced by: DN4E-59-590C
- Replaces: DN4E-59-590
Fits the following Mazda Models:
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Carrier Part Number: BHN9-73-97XA
$22.84 MSRP: $30.45
You Save: $7.61 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Rear, Left), Door Module
- Position: Left
- Replaces: BHN9-73-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: GD7A-59-560A
$31.04 MSRP: $41.39
You Save: $10.35 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Left, Window
- Position: Left
Fits the following Mazda Models:
- 626 | 1998-2002 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Carrier Part Number: BJS7-72-97XA
$31.81 MSRP: $42.43
You Save: $10.62 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Rear, Right), Door Module
- Position: Right
- Replaces: BJS7-72-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: KB7W-72-590
$35.18 MSRP: $46.92
You Save: $11.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame(Right), Window Regulator; Window Regulator
- Position: Right
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: KB7W-73-590
$35.18 MSRP: $46.92
You Save: $11.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame(Left), Window Regulator; Window Regulator
- Position: Left
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: KB7W-58-590
$35.86 MSRP: $47.82
You Save: $11.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm/Base(Right), Window; Window Regulator
- Position: Right
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: DGH9-72-590
$37.33 MSRP: $49.77
You Save: $12.44 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame(Right), Window Regulator; Window Regulator
- Position: Right
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Part Number: BHN9-72-97XA
$36.78 MSRP: $49.05
You Save: $12.27 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Rear, Right), Door Module
- Position: Right
- Replaces: BHN9-72-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: DGH9-73-590
$39.84 MSRP: $53.13
You Save: $13.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame(Left), Window Regulator; Window Regulator
- Position: Left
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Part Number: BJS7-59-97XB
$42.33 MSRP: $56.44
You Save: $14.11 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Front, Left), Door
- Position: Left
- Replaces: BJS7-59-97XA, BJS7-59-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Assembly Part Number: D09L-73-97XB
$43.24 MSRP: $57.65
You Save: $14.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Rear, Left), Door Module; Carrier Assembly
- Position: Left
- Replaces: D09L-73-97XA
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Carrier Part Number: BJS7-58-97XB
$46.53 MSRP: $62.05
You Save: $15.52 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Front, Right), Door
- Position: Right
- Replaces: BJS7-58-97XA, BJS7-58-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Assembly Part Number: DA6R-59-97XB
$45.51 MSRP: $60.70
You Save: $15.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Front, Left), Door Module; Carrier Assembly
- Position: Left
- Replaces: DA6R-59-97XA
Fits the following Mazda Models:
- CX-3 | 2016-2019 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Carrier Part Number: GHP9-58-97XD
$49.04 MSRP: $65.39
You Save: $16.35 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Front, Right), Door Module; Carrier
- Position: Right
- Replaces: GHP9-58-97XC, GHP9-58-97XB, GHP9-58-97X, GHP9-58-97XA
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Part Number: GHP9-59-97XD
$49.70 MSRP: $66.29
You Save: $16.59 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier(Front, Left), Door Module; Carrier
- Position: Left
- Replaces: GHP9-59-97XB, GHP9-59-97XA, GHP9-59-97X, GHP9-59-97XC
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: DGH9-58-590
$81.61 MSRP: $108.84
You Save: $27.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm/Base(Right), Window; Window Regulator
- Position: Right
- Replaced by: DGH9-58-590A
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Window Regulator Part Number: D10E-73-590A
$50.51 MSRP: $67.36
You Save: $16.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame(Left), Window Regulator; Window Regulator
- Position: Left
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Carrier Part Number: BJS7-73-97XA
Product Specifications
- Other Name: Carrier(Rear, Left), Door Module
- Position: Left
- Replaces: BJS7-73-97X
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Carrier Part Number: DR61-73-97X
Product Specifications
- Other Name: Carrier(Rear, Left), Door Module
- Position: Left
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS

| Page 1 of 13 |Next >

1-20 of 242 Results

Mazda Window Regulator

The Mazda Window Regulator allows each passenger to raise or lower the glass with ease so that comfort and fresh air is just a button press away, a simple feature which exemplifies its attention to everyday driving joy. Mazda started the vehicle business in 1931 and made a name for itself with the rotary engine, and more recently has honed efficiency with Skyactiv powertrains that sip fuel without dulling performance, all encased in Kodo Soul of Motion styling that makes each silhouette look alive even at rest. Mazda also has i-Activsense aids such as lane-keep and radar cruise to help families stay confident on long trips, and its i-Activ AWD tackles slippery city streets or bumpy backroads while retaining that trademark responsive handling. Moving towards the future, Mazda experiments with electric drives and mild hybrids to give owners clean mobility without sacrificing the fun feel that defines the brand. Just as the engines balance punch and thrift, the Window Regulator balances strength and finesse, with tracks and linkages guiding the pane without wobble, keeping the cabin quiet and solid. Early versions employed a hand crank gear set, but later electric units are powered by a compact motor, yet both types have the same mission to interpret the driver's intent and reliably move the glass. Because the Mazda Window Regulator works dozens of times per trip, its robust design in every Mazda door endures the wear and tear, helping the brand provide enduring quality and an experience that feels premium long after the new-car smell has dissipated.

You'll get great performance and real durability when you pick genuine OEM Window Regulator. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Window Regulator Parts and Q&A

Carrier
GEG1-59-97YA
Q: How to replace the window motor and window regulator assembly on Mazda 6?
A:
To replace the power window motor, first disconnect the cable from the negative battery terminal, then remove the door trim panel. Next, disconnect the electrical connector from the regulator motor and secure the window in place with tape. Remove the three regulator motor mounting screws and take out the motor, with installation being the reverse of removal. For the regulator assembly, begin by removing the door trim panel and the front door speaker, followed by the door glass. If the vehicle has power windows, remove the power window motor. Then, take off the regulator mounting nuts, insert one hand through the speaker hole to rotate the window regulator drum housing clockwise from the inside, and disconnect the tabs from the door module. Remove the window regulator through the speaker hole, install the new regulator through the same hole, and ensure the drum housing locks into the door module while preventing the cable from un-spooling. Finally, tighten the regulator mounting nuts or bolts securely, with the remainder of the installation being the reverse of removal.
Window Regulator
BBM4-73-590
Q: How to replace the window motor and window regulator assembly on Mazda 3?
A:
In order to change the power window motor, connect the cable to the negative battery first, remove door trim panel, and then unconnect the electrical connector to the regulator motor. Tape the window and continue removing the three regulator motor mounting screws and extract the motor. In the case of the regulator assembly, the door trim panel, the front door speaker, and the door glass should be removed. In case of the model being powered by the power window, take out the power window motor. Then dismount the regulator mounting nuts or bolts and put your hand through the speaker hole and with the thumb clockwise and inwards on the inside and loosen the tabs on the door module. To install, take out the window regulator using the speaker hole, and fit in the new regulator using the same hole, make sure the drum housing fits into the door module, and the cable does not unspool. Lastly, install the regulator with the mounting nuts or bolts, which should be tightened securely, and install the rest of the regulator in reverse order.